Two-phase flow heat transfer of CO2 vaporization in smooth horizontal minichannels

Kwang Il Choi, Agus Sunjarianto Pamitran, Jong Taek Oh

Research output: Contribution to journalArticlepeer-review

73 Citations (Scopus)

Abstract

Experiments were performed on the convective boiling heat transfer in horizontal minichannels with CO2. The test section is made of stainless steel tubes with inner diameters of 1.5 and 3.0 mm and with lengths of 2000 and 3000 mm, respectively, and it is uniformly heated by applying an electric current directly to the tubes. Local heat transfer coefficients were obtained for a heat flux range of 20-40 kW m-2, a mass flux range of 200-600 kg m-2 s-1, saturation temperatures of 10, 0, -5, and -10 °C and quality ranges of up to 1.0. Nucleate boiling heat transfer contribution was predominant, especially at low quality region. The reduction of heat transfer coefficient occurred at a lower vapor quality with a rise of heat flux, mass flux and saturation temperature, and with a smaller inner tube diameter. The experimental heat transfer coefficient of CO2 is about three times higher than that of R-134a. Laminar flow appears in the minichannel flows. A new boiling heat transfer coefficient correlation that is based on the superposition model for CO2 was developed with 8.41% mean deviation.

Original languageEnglish
Pages (from-to)767-777
Number of pages11
JournalInternational Journal of Refrigeration
Volume30
Issue number5
DOIs
Publication statusPublished - 1 Aug 2007

Keywords

  • Boiling
  • Carbon dioxide
  • Experiment
  • Heat transfer coefficient
  • Horizontal tube
  • Microchannel
  • R744
  • Two-phase flow

Fingerprint Dive into the research topics of 'Two-phase flow heat transfer of CO2 vaporization in smooth horizontal minichannels'. Together they form a unique fingerprint.

Cite this