The influence of various percentage of Al2O3 by using vortex method to tensile strength and the distribution of Al2O3p composite

Salahuddin Junus; Anne Zulfia Syahrial,; Eric Tanoto; Lilis Mariani

doi:10.4028/www.scientific.net/AMR.789.8

The influence of various percentage of Al₂O₃ by using vortex method to tensile strength and the distribution of Al₂O_3p composite

Salahuddin Junus, Anne Zulfia Syahrial,, Eric Tanoto, Lilis Mariani

Department of Metallurgical and Material Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Aluminum composite reinforced ceramic particles can be created through stirring process (Stir Casting) so that the molten aluminum to form a vortex as a space for the reinforced of Al₂O₃ particles well distributed on the aluminum melt. Engineering ceramic particles and vortex formation process will determine the distribution of particles in molten aluminum metal. Mg was added during the melting and argon was flushed to improve wetting system and protect oxidation. In this study, billet Al.6061 was combined with various percentage of Al₂O₃ from 5Vf % to 20Vf%. The results showed that the optimum tensile strength obtained at 10Vf % Al₂O₃ with the value of 190 MPa.

Original language	English
Title of host publication	Advances in Materials, Processing and Manufacturing
Pages	8-11
Number of pages	4
DOIs	https://doi.org/10.4028/www.scientific.net/AMR.789.8
Publication status	Published - 2013
Event	13th International Conference on Quality in Research, QiR 2013 - Yogyakarta, Indonesia Duration: 25 Jun 2013 → 28 Jun 2013

Publication series

Name	Advanced Materials Research
Volume	789
ISSN (Print)	1022-6680

Conference

Conference	13th International Conference on Quality in Research, QiR 2013
Country/Territory	Indonesia
City	Yogyakarta
Period	25/06/13 → 28/06/13

Keywords

AlO ceramic particles
Aluminum composite
Billet Al.6061
Volume fraction
Vortex method (stir casting)

Access to Document

10.4028/www.scientific.net/AMR.789.8

Cite this

@inproceedings{2b5377a98d4c4e718570cab960e454c9,

title = "The influence of various percentage of Al2O3 by using vortex method to tensile strength and the distribution of Al2O3p composite",

abstract = "Aluminum composite reinforced ceramic particles can be created through stirring process (Stir Casting) so that the molten aluminum to form a vortex as a space for the reinforced of Al2O3 particles well distributed on the aluminum melt. Engineering ceramic particles and vortex formation process will determine the distribution of particles in molten aluminum metal. Mg was added during the melting and argon was flushed to improve wetting system and protect oxidation. In this study, billet Al.6061 was combined with various percentage of Al2O3 from 5Vf % to 20Vf%. The results showed that the optimum tensile strength obtained at 10Vf % Al2O3 with the value of 190 MPa.",

keywords = "AlO ceramic particles, Aluminum composite, Billet Al.6061, Volume fraction, Vortex method (stir casting)",

author = "Salahuddin Junus and Syahrial,, {Anne Zulfia} and Eric Tanoto and Lilis Mariani",

year = "2013",

doi = "10.4028/www.scientific.net/AMR.789.8",

language = "English",

isbn = "9783037857571",

series = "Advanced Materials Research",

pages = "8--11",

booktitle = "Advances in Materials, Processing and Manufacturing",

note = "13th International Conference on Quality in Research, QiR 2013 ; Conference date: 25-06-2013 Through 28-06-2013",

}

Junus, S, Syahrial, AZ, Tanoto, E & Mariani, L 2013, The influence of various percentage of Al₂O₃ by using vortex method to tensile strength and the distribution of Al₂O_3p composite. in Advances in Materials, Processing and Manufacturing. Advanced Materials Research, vol. 789, pp. 8-11, 13th International Conference on Quality in Research, QiR 2013, Yogyakarta, Indonesia, 25/06/13. https://doi.org/10.4028/www.scientific.net/AMR.789.8

The influence of various percentage of Al₂O₃ by using vortex method to tensile strength and the distribution of Al₂O_3p composite. / Junus, Salahuddin; Syahrial, Anne Zulfia; Tanoto, Eric et al.
Advances in Materials, Processing and Manufacturing. 2013. p. 8-11 (Advanced Materials Research; Vol. 789).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The influence of various percentage of Al2O3 by using vortex method to tensile strength and the distribution of Al2O3p composite

AU - Junus, Salahuddin

AU - Syahrial,, Anne Zulfia

AU - Tanoto, Eric

AU - Mariani, Lilis

PY - 2013

Y1 - 2013

N2 - Aluminum composite reinforced ceramic particles can be created through stirring process (Stir Casting) so that the molten aluminum to form a vortex as a space for the reinforced of Al2O3 particles well distributed on the aluminum melt. Engineering ceramic particles and vortex formation process will determine the distribution of particles in molten aluminum metal. Mg was added during the melting and argon was flushed to improve wetting system and protect oxidation. In this study, billet Al.6061 was combined with various percentage of Al2O3 from 5Vf % to 20Vf%. The results showed that the optimum tensile strength obtained at 10Vf % Al2O3 with the value of 190 MPa.

AB - Aluminum composite reinforced ceramic particles can be created through stirring process (Stir Casting) so that the molten aluminum to form a vortex as a space for the reinforced of Al2O3 particles well distributed on the aluminum melt. Engineering ceramic particles and vortex formation process will determine the distribution of particles in molten aluminum metal. Mg was added during the melting and argon was flushed to improve wetting system and protect oxidation. In this study, billet Al.6061 was combined with various percentage of Al2O3 from 5Vf % to 20Vf%. The results showed that the optimum tensile strength obtained at 10Vf % Al2O3 with the value of 190 MPa.

KW - AlO ceramic particles

KW - Aluminum composite

KW - Billet Al.6061

KW - Volume fraction

KW - Vortex method (stir casting)

UR - http://www.scopus.com/inward/record.url?scp=84886242456&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMR.789.8

DO - 10.4028/www.scientific.net/AMR.789.8

M3 - Conference contribution

AN - SCOPUS:84886242456

SN - 9783037857571

T3 - Advanced Materials Research

SP - 8

EP - 11

BT - Advances in Materials, Processing and Manufacturing

T2 - 13th International Conference on Quality in Research, QiR 2013

Y2 - 25 June 2013 through 28 June 2013

ER -