The design of stethoscope-based heart rate monitoring device for infant incubator application

Fitriyanti Nur Aisyah; Aryanthera W. Ketut Vanda; Kresna Devara; Nji Raden Poespawati; Retno Wigajatri Purnamaningsih

doi:10.1063/1.5096686

The design of stethoscope-based heart rate monitoring device for infant incubator application

Fitriyanti Nur Aisyah, Aryanthera W. Ketut Vanda, Kresna Devara, Nji Raden Poespawati, Retno Wigajatri Purnamaningsih

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The design of stethoscope-based heart rate monitoring device for infant incubator applications was reported in this paper. This device utilizes a stethoscope as a heartbeat sensor which was placed on the incubator mattress. This heartbeat signal was then processed by a signal-conditioning electronic circuit. After that, the output was processed by an Arduino Uno microcontroller before being displayed on an LCD in the form of BPM (beat per minutes). The device is also equipped with a buzzer to indicate the absence of a heartbeat. The measurement results showed that the device could measure heartbeats from a baby's back with a 3.23% possibility of error.

Original language	English
Title of host publication	3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices
Subtitle of host publication	Proceedings of the International Symposium of Biomedical Engineering, ISBE 2018
Editors	Praswasti P.D.K. Wulan, Misri Gozan, Sotya Astutiningsih, Ghiska Ramahdita, Radon Dhelika, Prasetyanugraheni Kreshanti
Publisher	American Institute of Physics Inc.
ISBN (Electronic)	9780735418226
DOIs	https://doi.org/10.1063/1.5096686
Publication status	Published - 9 Apr 2019
Event	3rd International Symposium of Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices, ISBE 2018 - Jakarta, Indonesia Duration: 6 Aug 2018 → 8 Aug 2018

Publication series

Name	AIP Conference Proceedings
Volume	2092
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	3rd International Symposium of Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices, ISBE 2018
Country/Territory	Indonesia
City	Jakarta
Period	6/08/18 → 8/08/18

Keywords

electronic stethoscope
heart rate monitoring
incubator application
microcontroller Arduino Uno

Access to Document

10.1063/1.5096686

Cite this

Aisyah, F. N., Ketut Vanda, A. W., Devara, K., Poespawati, N. R., & Purnamaningsih, R. W. (2019). The design of stethoscope-based heart rate monitoring device for infant incubator application. In P. P. D. K. Wulan, M. Gozan, S. Astutiningsih, G. Ramahdita, R. Dhelika, & P. Kreshanti (Eds.), 3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices: Proceedings of the International Symposium of Biomedical Engineering, ISBE 2018 [020018] (AIP Conference Proceedings; Vol. 2092). American Institute of Physics Inc.. https://doi.org/10.1063/1.5096686

Aisyah, Fitriyanti Nur ; Ketut Vanda, Aryanthera W. ; Devara, Kresna ; Poespawati, Nji Raden ; Purnamaningsih, Retno Wigajatri. / The design of stethoscope-based heart rate monitoring device for infant incubator application. 3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices: Proceedings of the International Symposium of Biomedical Engineering, ISBE 2018. editor / Praswasti P.D.K. Wulan ; Misri Gozan ; Sotya Astutiningsih ; Ghiska Ramahdita ; Radon Dhelika ; Prasetyanugraheni Kreshanti. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).

@inproceedings{ea929617b0ea40ffb45b0d557da72caa,

title = "The design of stethoscope-based heart rate monitoring device for infant incubator application",

abstract = "The design of stethoscope-based heart rate monitoring device for infant incubator applications was reported in this paper. This device utilizes a stethoscope as a heartbeat sensor which was placed on the incubator mattress. This heartbeat signal was then processed by a signal-conditioning electronic circuit. After that, the output was processed by an Arduino Uno microcontroller before being displayed on an LCD in the form of BPM (beat per minutes). The device is also equipped with a buzzer to indicate the absence of a heartbeat. The measurement results showed that the device could measure heartbeats from a baby's back with a 3.23% possibility of error.",

keywords = "electronic stethoscope, heart rate monitoring, incubator application, microcontroller Arduino Uno",

author = "Aisyah, {Fitriyanti Nur} and {Ketut Vanda}, {Aryanthera W.} and Kresna Devara and Poespawati, {Nji Raden} and Purnamaningsih, {Retno Wigajatri}",

year = "2019",

month = apr,

day = "9",

doi = "10.1063/1.5096686",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

editor = "Wulan, {Praswasti P.D.K.} and Misri Gozan and Sotya Astutiningsih and Ghiska Ramahdita and Radon Dhelika and Prasetyanugraheni Kreshanti",

booktitle = "3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices",

note = "3rd International Symposium of Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices, ISBE 2018 ; Conference date: 06-08-2018 Through 08-08-2018",

}

Aisyah, FN, Ketut Vanda, AW, Devara, K, Poespawati, NR & Purnamaningsih, RW 2019, The design of stethoscope-based heart rate monitoring device for infant incubator application. in PPDK Wulan, M Gozan, S Astutiningsih, G Ramahdita, R Dhelika & P Kreshanti (eds), 3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices: Proceedings of the International Symposium of Biomedical Engineering, ISBE 2018., 020018, AIP Conference Proceedings, vol. 2092, American Institute of Physics Inc., 3rd International Symposium of Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices, ISBE 2018, Jakarta, Indonesia, 6/08/18. https://doi.org/10.1063/1.5096686

The design of stethoscope-based heart rate monitoring device for infant incubator application. / Aisyah, Fitriyanti Nur; Ketut Vanda, Aryanthera W.; Devara, Kresna; Poespawati, Nji Raden ; Purnamaningsih, Retno Wigajatri.

3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices: Proceedings of the International Symposium of Biomedical Engineering, ISBE 2018. ed. / Praswasti P.D.K. Wulan; Misri Gozan; Sotya Astutiningsih; Ghiska Ramahdita; Radon Dhelika; Prasetyanugraheni Kreshanti. American Institute of Physics Inc., 2019. 020018 (AIP Conference Proceedings; Vol. 2092).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The design of stethoscope-based heart rate monitoring device for infant incubator application

AU - Aisyah, Fitriyanti Nur

AU - Ketut Vanda, Aryanthera W.

AU - Devara, Kresna

AU - Poespawati, Nji Raden

AU - Purnamaningsih, Retno Wigajatri

PY - 2019/4/9

Y1 - 2019/4/9

N2 - The design of stethoscope-based heart rate monitoring device for infant incubator applications was reported in this paper. This device utilizes a stethoscope as a heartbeat sensor which was placed on the incubator mattress. This heartbeat signal was then processed by a signal-conditioning electronic circuit. After that, the output was processed by an Arduino Uno microcontroller before being displayed on an LCD in the form of BPM (beat per minutes). The device is also equipped with a buzzer to indicate the absence of a heartbeat. The measurement results showed that the device could measure heartbeats from a baby's back with a 3.23% possibility of error.

AB - The design of stethoscope-based heart rate monitoring device for infant incubator applications was reported in this paper. This device utilizes a stethoscope as a heartbeat sensor which was placed on the incubator mattress. This heartbeat signal was then processed by a signal-conditioning electronic circuit. After that, the output was processed by an Arduino Uno microcontroller before being displayed on an LCD in the form of BPM (beat per minutes). The device is also equipped with a buzzer to indicate the absence of a heartbeat. The measurement results showed that the device could measure heartbeats from a baby's back with a 3.23% possibility of error.

KW - electronic stethoscope

KW - heart rate monitoring

KW - incubator application

KW - microcontroller Arduino Uno

UR - http://www.scopus.com/inward/record.url?scp=85064826524&partnerID=8YFLogxK

U2 - 10.1063/1.5096686

DO - 10.1063/1.5096686

M3 - Conference contribution

AN - SCOPUS:85064826524

T3 - AIP Conference Proceedings

BT - 3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices

A2 - Wulan, Praswasti P.D.K.

A2 - Gozan, Misri

A2 - Astutiningsih, Sotya

A2 - Ramahdita, Ghiska

A2 - Dhelika, Radon

A2 - Kreshanti, Prasetyanugraheni

PB - American Institute of Physics Inc.

T2 - 3rd International Symposium of Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices, ISBE 2018

Y2 - 6 August 2018 through 8 August 2018

ER -

Aisyah FN, Ketut Vanda AW, Devara K, Poespawati NR , Purnamaningsih RW. The design of stethoscope-based heart rate monitoring device for infant incubator application. In Wulan PPDK, Gozan M, Astutiningsih S, Ramahdita G, Dhelika R, Kreshanti P, editors, 3rd Biomedical Engineering''s Recent Progress in Biomaterials, Drugs Development, and Medical Devices: Proceedings of the International Symposium of Biomedical Engineering, ISBE 2018. American Institute of Physics Inc. 2019. 020018. (AIP Conference Proceedings). https://doi.org/10.1063/1.5096686

The design of stethoscope-based heart rate monitoring device for infant incubator application

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this