Substitution effect of (Mn, Ti) to the dielectric properties of barium-strontium hexaferrite for absorbing electromagnetic waves

V. Vekky R Repi, Azwar Manaf

Research output: Chapter in Book/Report/Conference proceedingChapterpeer-review

1 Citation (Scopus)

Abstract

The objective of this work is to evaluate the ability of Mn-Ti substituted barium-strontium hexaferrite to absorb high frequency electromagnetic wave. To accomplish this objective, Mn-Ti substituted barium strontium hexaferrite of Ba0.5Sr0.5Fe12-x(Mn0.5Ti0.5)x with x = 0.1, x=0.3, x=0.5 were prepared through mechanical alloying route. Phase identification of the material obtained from XRD pattern indicating that the material is single phase for all variations of x. Coercivity and the remanent obtained by analyzing the hysteresis curve. The lowest coercivity at x = 0.5 for 77.86 kA/m but also lower the remanent of 0.088 kA/m. Dielectric properties of the material traced by calculating the value of permittivity and permeability of the material that was obtained with the parameters of the scattering vector network analyzer (VNA) in the 8GHz to 12GHz range.

Original languageEnglish
Title of host publicationAIP Conference Proceedings
Pages282-285
Number of pages4
Edition1
DOIs
Publication statusPublished - Nov 2011

Publication series

NameAIP Conference Proceedings
Number1
Volume1454
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Keywords

  • Barium-strontium hexaferrite
  • Electromagnetic wave absorber
  • Mechanical alloying
  • Permittivity and permeability

Fingerprint

Dive into the research topics of 'Substitution effect of (Mn, Ti) to the dielectric properties of barium-strontium hexaferrite for absorbing electromagnetic waves'. Together they form a unique fingerprint.

Cite this