Study of mechanical properties of steel plate using Arduino microcontroller

Imam T. Rahmadi; Bastian O.B. Sentosa; Nuraziz Handika; James J. Oetomo; Jessica Sjah

doi:10.1063/5.0183221

Study of mechanical properties of steel plate using Arduino microcontroller

Imam T. Rahmadi, Bastian O.B. Sentosa, Nuraziz Handika, James J. Oetomo, Jessica Sjah

Department of Civil Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper presents the use of an open source-based technology, Arduino microcontroller, which is used for strain measurement by using strain gauge. The test was carried out in two variations, simply support beam and cantilever beam. This research used steel plates as specimens with 600mm length, 25mm width, and 3mm thickness. Specimen equipped with 3 numbers of strain gauge and a dial gauge to control the displacement that occurs. Each step of loading adds 2N until reach 10 N for simple beam and 6N for cantilever beam. The results show that in the compression zone, strain gauge show a negative value as the load increment, in other side the tensile zone, strain gauge show a positive value as the load increment. Data results are consistent in the two variations of the research conducted. The fluctuation of strain that occurs can be recorded properly by the Arduino microcontroller system equipped with a BF120 sensor, although it still has a relative high noise from the raw data recorded.

Original language	English
Title of host publication	AIP Conference Proceedings
Editors	Chan Mieow Kee, Leelavathi Rajamanickam, Wang Chan Chin, Tan Yong Chai, Shamini Janasekaran, Salmaliza Salleh, Lim Mee Wei, Muhammad Zulhaziman Mat Salleh, Nurulazlina Ramli, Ho Kah Chun, Rajamohan Parthasarathy
Publisher	American Institute of Physics Inc.
Edition	1
ISBN (Electronic)	9780735447530
DOIs	https://doi.org/10.1063/5.0183221
Publication status	Published - 27 Nov 2023
Event	2022 International Conference on Sustainable Engineering and Advanced Technology, ICSEAT 2022 - Kota Damansara, Malaysia Duration: 16 Jun 2022 → 17 Jun 2022

Publication series

Name	AIP Conference Proceedings
Number	1
Volume	2847
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	2022 International Conference on Sustainable Engineering and Advanced Technology, ICSEAT 2022
Country/Territory	Malaysia
City	Kota Damansara
Period	16/06/22 → 17/06/22

Keywords

Arduino
Flexure
Micro controller
SHMS
Strain gauge

Access to Document

10.1063/5.0183221

Cite this

Rahmadi, I. T., Sentosa, B. O. B., Handika, N., Oetomo, J. J., & Sjah, J. (2023). Study of mechanical properties of steel plate using Arduino microcontroller. In C. M. Kee, L. Rajamanickam, W. C. Chin, T. Y. Chai, S. Janasekaran, S. Salleh, L. M. Wei, M. Z. M. Salleh, N. Ramli, H. K. Chun, & R. Parthasarathy (Eds.), AIP Conference Proceedings (1 ed.). Article 050012 (AIP Conference Proceedings; Vol. 2847, No. 1). American Institute of Physics Inc.. https://doi.org/10.1063/5.0183221

Rahmadi, Imam T. ; Sentosa, Bastian O.B. ; Handika, Nuraziz et al. / Study of mechanical properties of steel plate using Arduino microcontroller. AIP Conference Proceedings. editor / Chan Mieow Kee ; Leelavathi Rajamanickam ; Wang Chan Chin ; Tan Yong Chai ; Shamini Janasekaran ; Salmaliza Salleh ; Lim Mee Wei ; Muhammad Zulhaziman Mat Salleh ; Nurulazlina Ramli ; Ho Kah Chun ; Rajamohan Parthasarathy. 1. ed. American Institute of Physics Inc., 2023. (AIP Conference Proceedings; 1).

@inproceedings{53345b60dbb24159abe30b2e51cb4d80,

title = "Study of mechanical properties of steel plate using Arduino microcontroller",

abstract = "This paper presents the use of an open source-based technology, Arduino microcontroller, which is used for strain measurement by using strain gauge. The test was carried out in two variations, simply support beam and cantilever beam. This research used steel plates as specimens with 600mm length, 25mm width, and 3mm thickness. Specimen equipped with 3 numbers of strain gauge and a dial gauge to control the displacement that occurs. Each step of loading adds 2N until reach 10 N for simple beam and 6N for cantilever beam. The results show that in the compression zone, strain gauge show a negative value as the load increment, in other side the tensile zone, strain gauge show a positive value as the load increment. Data results are consistent in the two variations of the research conducted. The fluctuation of strain that occurs can be recorded properly by the Arduino microcontroller system equipped with a BF120 sensor, although it still has a relative high noise from the raw data recorded.",

keywords = "Arduino, Flexure, Micro controller, SHMS, Strain gauge",

author = "Rahmadi, {Imam T.} and Sentosa, {Bastian O.B.} and Nuraziz Handika and Oetomo, {James J.} and Jessica Sjah",

note = "Publisher Copyright: {\textcopyright} 2023 Author(s).; 2022 International Conference on Sustainable Engineering and Advanced Technology, ICSEAT 2022 ; Conference date: 16-06-2022 Through 17-06-2022",

year = "2023",

month = nov,

day = "27",

doi = "10.1063/5.0183221",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

number = "1",

editor = "Kee, {Chan Mieow} and Leelavathi Rajamanickam and Chin, {Wang Chan} and Chai, {Tan Yong} and Shamini Janasekaran and Salmaliza Salleh and Wei, {Lim Mee} and Salleh, {Muhammad Zulhaziman Mat} and Nurulazlina Ramli and Chun, {Ho Kah} and Rajamohan Parthasarathy",

booktitle = "AIP Conference Proceedings",

address = "United States",

edition = "1",

}

Rahmadi, IT, Sentosa, BOB , Handika, N, Oetomo, JJ & Sjah, J 2023, Study of mechanical properties of steel plate using Arduino microcontroller. in CM Kee, L Rajamanickam, WC Chin, TY Chai, S Janasekaran, S Salleh, LM Wei, MZM Salleh, N Ramli, HK Chun & R Parthasarathy (eds), AIP Conference Proceedings. 1 edn, 050012, AIP Conference Proceedings, no. 1, vol. 2847, American Institute of Physics Inc., 2022 International Conference on Sustainable Engineering and Advanced Technology, ICSEAT 2022, Kota Damansara, Malaysia, 16/06/22. https://doi.org/10.1063/5.0183221

Study of mechanical properties of steel plate using Arduino microcontroller. / Rahmadi, Imam T.; Sentosa, Bastian O.B.; Handika, Nuraziz et al.
AIP Conference Proceedings. ed. / Chan Mieow Kee; Leelavathi Rajamanickam; Wang Chan Chin; Tan Yong Chai; Shamini Janasekaran; Salmaliza Salleh; Lim Mee Wei; Muhammad Zulhaziman Mat Salleh; Nurulazlina Ramli; Ho Kah Chun; Rajamohan Parthasarathy. 1. ed. American Institute of Physics Inc., 2023. 050012 (AIP Conference Proceedings; Vol. 2847, No. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Study of mechanical properties of steel plate using Arduino microcontroller

AU - Rahmadi, Imam T.

AU - Sentosa, Bastian O.B.

AU - Handika, Nuraziz

AU - Oetomo, James J.

AU - Sjah, Jessica

PY - 2023/11/27

Y1 - 2023/11/27

N2 - This paper presents the use of an open source-based technology, Arduino microcontroller, which is used for strain measurement by using strain gauge. The test was carried out in two variations, simply support beam and cantilever beam. This research used steel plates as specimens with 600mm length, 25mm width, and 3mm thickness. Specimen equipped with 3 numbers of strain gauge and a dial gauge to control the displacement that occurs. Each step of loading adds 2N until reach 10 N for simple beam and 6N for cantilever beam. The results show that in the compression zone, strain gauge show a negative value as the load increment, in other side the tensile zone, strain gauge show a positive value as the load increment. Data results are consistent in the two variations of the research conducted. The fluctuation of strain that occurs can be recorded properly by the Arduino microcontroller system equipped with a BF120 sensor, although it still has a relative high noise from the raw data recorded.

AB - This paper presents the use of an open source-based technology, Arduino microcontroller, which is used for strain measurement by using strain gauge. The test was carried out in two variations, simply support beam and cantilever beam. This research used steel plates as specimens with 600mm length, 25mm width, and 3mm thickness. Specimen equipped with 3 numbers of strain gauge and a dial gauge to control the displacement that occurs. Each step of loading adds 2N until reach 10 N for simple beam and 6N for cantilever beam. The results show that in the compression zone, strain gauge show a negative value as the load increment, in other side the tensile zone, strain gauge show a positive value as the load increment. Data results are consistent in the two variations of the research conducted. The fluctuation of strain that occurs can be recorded properly by the Arduino microcontroller system equipped with a BF120 sensor, although it still has a relative high noise from the raw data recorded.

KW - Arduino

KW - Flexure

KW - Micro controller

KW - SHMS

KW - Strain gauge

UR - http://www.scopus.com/inward/record.url?scp=85179829665&partnerID=8YFLogxK

U2 - 10.1063/5.0183221

DO - 10.1063/5.0183221

M3 - Conference contribution

AN - SCOPUS:85179829665

T3 - AIP Conference Proceedings

BT - AIP Conference Proceedings

A2 - Kee, Chan Mieow

A2 - Rajamanickam, Leelavathi

A2 - Chin, Wang Chan

A2 - Chai, Tan Yong

A2 - Janasekaran, Shamini

A2 - Salleh, Salmaliza

A2 - Wei, Lim Mee

A2 - Salleh, Muhammad Zulhaziman Mat

A2 - Ramli, Nurulazlina

A2 - Chun, Ho Kah

A2 - Parthasarathy, Rajamohan

PB - American Institute of Physics Inc.

T2 - 2022 International Conference on Sustainable Engineering and Advanced Technology, ICSEAT 2022

Y2 - 16 June 2022 through 17 June 2022

ER -

Rahmadi IT, Sentosa BOB , Handika N, Oetomo JJ, Sjah J. Study of mechanical properties of steel plate using Arduino microcontroller. In Kee CM, Rajamanickam L, Chin WC, Chai TY, Janasekaran S, Salleh S, Wei LM, Salleh MZM, Ramli N, Chun HK, Parthasarathy R, editors, AIP Conference Proceedings. 1 ed. American Institute of Physics Inc. 2023. 050012. (AIP Conference Proceedings; 1). doi: 10.1063/5.0183221

Study of mechanical properties of steel plate using Arduino microcontroller

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this