STATIC SIMULATION of E-BIKE TILTING THREE-WHEELED FRAME STRUCTURE USING the FINITE ELEMENT METHOD

Aufar Syehan, Anjas Trihatmojo Pamungkas, Danardono Agus Sumarsono

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

The purpose of the present study was to estimate the static strength of the frame structure developed from the initial tilting three-wheeled electric bike design using the Finite Element Analysis (FEA) assisted by the Static SOLIDWORKS Simulation software with a configuration of two wheels located at the front and one wheel at the back position. The main consideration of structural strength was seen from the point of view of the distribution of static loads using three types of materials (6061-T6 aluminium, AISI 1020 Steel and CFRP). The minimum factor of safety resulting from the initial design simulation was estimated to be 1.84.

Original languageEnglish
Article number012088
JournalIOP Conference Series: Materials Science and Engineering
Volume494
Issue number1
DOIs
Publication statusPublished - 29 Mar 2019
EventInternational Conference on Mechanical Engineering Research and Application 2018, ICOMERA 2018 - Malang, Indonesia
Duration: 23 Oct 201825 Oct 2018

Keywords

  • finite element analysis
  • frame
  • three-wheeled tilting
  • Urban vehicles

Fingerprint

Dive into the research topics of 'STATIC SIMULATION of E-BIKE TILTING THREE-WHEELED FRAME STRUCTURE USING the FINITE ELEMENT METHOD'. Together they form a unique fingerprint.

Cite this