Simulation of adsorber tube diameter's effect on new design silica gel-water adsorption chiller

Nasruddin, A. Taufan, A. Manga, D. Budiman

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

A new design of silica gel-water adsorption chiller is proposed. The design configuration is composed of two sorption chambers with compact fin tube heat exchangers as adsorber, condenser, and evaporator. Heat and mass recovery were adopted in order to increase the cooling capacity. Numerical modelling and calculation were used to show the performance of the chiller with different adsorber tube diameter. Under typical condition for hot water inlet/cooling water inlet/chilled water outlet temperatures are 90/30/7°C, respectively, the simulation results showed the best average value of COP, SCP, and cooling power are 0.19, 15.88?W/kg and 279.89?W using 3/8 inch tube.

Original languageEnglish
Title of host publicationRenewable Energy Technology and Innovation for Sustainable Development
Subtitle of host publicationProceedings of the International Tropical Renewable Energy Conference, iTREC 2016
EditorsNofrijon Sofyan
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735414945
DOIs
Publication statusPublished - 28 Mar 2017
Event1st International Tropical Renewable Energy Conference: Renewable Energy Technology and Innovation for Sustainable Development, iTREC 2016 - Bogor, Indonesia
Duration: 26 Oct 201628 Oct 2016

Publication series

NameAIP Conference Proceedings
Volume1826
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

Conference1st International Tropical Renewable Energy Conference: Renewable Energy Technology and Innovation for Sustainable Development, iTREC 2016
CountryIndonesia
CityBogor
Period26/10/1628/10/16

Fingerprint Dive into the research topics of 'Simulation of adsorber tube diameter's effect on new design silica gel-water adsorption chiller'. Together they form a unique fingerprint.

Cite this