Shear Correction Factor Effect on Functionally Graded Material (FGM) Beam with Timoshenko Hencky Beam (THB) Element

Imam Jauhari Maknun; Dyah Ayu Aurellia Yasmiin

doi:10.5109/6625731

Shear Correction Factor Effect on Functionally Graded Material (FGM) Beam with Timoshenko Hencky Beam (THB) Element

Imam Jauhari Maknun, Dyah Ayu Aurellia Yasmiin

Department of Civil Engineering

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

This study is about the effect of the Shear Correction Factor on static analysis of a Functionally Graded Material (FGM) beam using the Timoshenko Hencky Beam (THB) element. The material properties are evaluated according to the Power Law index. The convergence of the FGM beam by using the constant shear correction factor is compared with the non-constant shear correction factor (called k-FGM). This study shows that the shear correction factor did not affect the displacement in a thick FGM beam with a small Young modulus ratio (0.35). The shear correction factor significantly affects the displacement in an FGM beam with a high Young modulus ratio (20). The results yield that the THB element can be used to apply FGM beams structures.

Original language	English
Pages (from-to)	1210-1217
Number of pages	8
Journal	Evergreen
Volume	9
Issue number	4
DOIs	https://doi.org/10.5109/6625731
Publication status	Published - Dec 2022

Keywords

Functionally Graded Material
MATLAB
static evaluation
Timoshenko Hencky Beam

Access to Document

10.5109/6625731

Cite this

@article{c02ea7afcb3a43eda042aeb0574408b4,

title = "Shear Correction Factor Effect on Functionally Graded Material (FGM) Beam with Timoshenko Hencky Beam (THB) Element",

abstract = "This study is about the effect of the Shear Correction Factor on static analysis of a Functionally Graded Material (FGM) beam using the Timoshenko Hencky Beam (THB) element. The material properties are evaluated according to the Power Law index. The convergence of the FGM beam by using the constant shear correction factor is compared with the non-constant shear correction factor (called k-FGM). This study shows that the shear correction factor did not affect the displacement in a thick FGM beam with a small Young modulus ratio (0.35). The shear correction factor significantly affects the displacement in an FGM beam with a high Young modulus ratio (20). The results yield that the THB element can be used to apply FGM beams structures.",

keywords = "Functionally Graded Material, MATLAB, static evaluation, Timoshenko Hencky Beam",

author = "Maknun, {Imam Jauhari} and {Aurellia Yasmiin}, {Dyah Ayu}",

year = "2022",

month = dec,

doi = "10.5109/6625731",

language = "English",

volume = "9",

pages = "1210--1217",

journal = "Evergreen",

issn = "2189-0420",

publisher = "Novel Carbon Resource Sciences",

number = "4",

}

TY - JOUR

T1 - Shear Correction Factor Effect on Functionally Graded Material (FGM) Beam with Timoshenko Hencky Beam (THB) Element

AU - Maknun, Imam Jauhari

AU - Aurellia Yasmiin, Dyah Ayu

PY - 2022/12

Y1 - 2022/12

N2 - This study is about the effect of the Shear Correction Factor on static analysis of a Functionally Graded Material (FGM) beam using the Timoshenko Hencky Beam (THB) element. The material properties are evaluated according to the Power Law index. The convergence of the FGM beam by using the constant shear correction factor is compared with the non-constant shear correction factor (called k-FGM). This study shows that the shear correction factor did not affect the displacement in a thick FGM beam with a small Young modulus ratio (0.35). The shear correction factor significantly affects the displacement in an FGM beam with a high Young modulus ratio (20). The results yield that the THB element can be used to apply FGM beams structures.

AB - This study is about the effect of the Shear Correction Factor on static analysis of a Functionally Graded Material (FGM) beam using the Timoshenko Hencky Beam (THB) element. The material properties are evaluated according to the Power Law index. The convergence of the FGM beam by using the constant shear correction factor is compared with the non-constant shear correction factor (called k-FGM). This study shows that the shear correction factor did not affect the displacement in a thick FGM beam with a small Young modulus ratio (0.35). The shear correction factor significantly affects the displacement in an FGM beam with a high Young modulus ratio (20). The results yield that the THB element can be used to apply FGM beams structures.

KW - Functionally Graded Material

KW - MATLAB

KW - static evaluation

KW - Timoshenko Hencky Beam

UR - http://www.scopus.com/inward/record.url?scp=85147305847&partnerID=8YFLogxK

U2 - 10.5109/6625731

DO - 10.5109/6625731

M3 - Article

AN - SCOPUS:85147305847

SN - 2189-0420

VL - 9

SP - 1210

EP - 1217

JO - Evergreen

JF - Evergreen

IS - 4

ER -

Shear Correction Factor Effect on Functionally Graded Material (FGM) Beam with Timoshenko Hencky Beam (THB) Element

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this