Review design of E-Motorcycle charger topology for DC house using planar magnetics

D. C. Muhammad; M. I. Alfath; A. M. Naradhipa; F. Husnayain; I. M. Ardita

doi:10.1088/1755-1315/599/1/012024

Review design of E-Motorcycle charger topology for DC house using planar magnetics

D. C. Muhammad, M. I. Alfath, A. M. Naradhipa, F. Husnayain, I. M. Ardita

Department of Electrical Engineering

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

Abstract

Following the global trend of adopting renewable energy into the electric power system, many direct currents (DC) houses concepts are proposed. Most of the renewable energy systems are based on DC voltage sources. This paper discussed the development of a lightweight, low-profile, and built-in electric motorcycle (E-Motorcycle) charger that does not take excessive space and compatible with the DC house system. A topology comparison in high switching frequency above 1 MHz using planar magnetics is performed to select the most suitable DC-DC converter. A wide bandgap (WBG) devices are used to achieve high efficiency in high switching frequency and reduce the charger's size. Simulation results and design of the selected topology is presented.

Original language	English
Article number	012024
Journal	IOP Conference Series: Earth and Environmental Science
Volume	599
Issue number	1
DOIs	https://doi.org/10.1088/1755-1315/599/1/012024
Publication status	Published - 24 Nov 2020
Event	2nd International Conference on Green Energy and Environment, ICoGEE 2020 - Pangkalpinang, Indonesia Duration: 8 Oct 2020 → …

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1088/1755-1315/599/1/012024

Cite this

@article{232ed28c591d4c489e55f40e3638c88e,

title = "Review design of E-Motorcycle charger topology for DC house using planar magnetics",

abstract = "Following the global trend of adopting renewable energy into the electric power system, many direct currents (DC) houses concepts are proposed. Most of the renewable energy systems are based on DC voltage sources. This paper discussed the development of a lightweight, low-profile, and built-in electric motorcycle (E-Motorcycle) charger that does not take excessive space and compatible with the DC house system. A topology comparison in high switching frequency above 1 MHz using planar magnetics is performed to select the most suitable DC-DC converter. A wide bandgap (WBG) devices are used to achieve high efficiency in high switching frequency and reduce the charger's size. Simulation results and design of the selected topology is presented. ",

author = "Muhammad, {D. C.} and Alfath, {M. I.} and Naradhipa, {A. M.} and F. Husnayain and Ardita, {I. M.}",

note = "Funding Information: This research is funded by a research grant 1190/UN2.RST/HKP.05.00/2020 from Universitas Indonesia. Publisher Copyright: {\textcopyright} Published under licence by IOP Publishing Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 2nd International Conference on Green Energy and Environment, ICoGEE 2020 ; Conference date: 08-10-2020",

year = "2020",

month = nov,

day = "24",

doi = "10.1088/1755-1315/599/1/012024",

language = "English",

volume = "599",

journal = "IOP Conference Series: Earth and Environmental Science",

issn = "1755-1307",

publisher = "IOP Publishing Ltd.",

number = "1",

}

TY - JOUR

T1 - Review design of E-Motorcycle charger topology for DC house using planar magnetics

AU - Muhammad, D. C.

AU - Alfath, M. I.

AU - Naradhipa, A. M.

AU - Husnayain, F.

AU - Ardita, I. M.

N1 - Funding Information: This research is funded by a research grant 1190/UN2.RST/HKP.05.00/2020 from Universitas Indonesia. Publisher Copyright: © Published under licence by IOP Publishing Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2020/11/24

Y1 - 2020/11/24

N2 - Following the global trend of adopting renewable energy into the electric power system, many direct currents (DC) houses concepts are proposed. Most of the renewable energy systems are based on DC voltage sources. This paper discussed the development of a lightweight, low-profile, and built-in electric motorcycle (E-Motorcycle) charger that does not take excessive space and compatible with the DC house system. A topology comparison in high switching frequency above 1 MHz using planar magnetics is performed to select the most suitable DC-DC converter. A wide bandgap (WBG) devices are used to achieve high efficiency in high switching frequency and reduce the charger's size. Simulation results and design of the selected topology is presented.

AB - Following the global trend of adopting renewable energy into the electric power system, many direct currents (DC) houses concepts are proposed. Most of the renewable energy systems are based on DC voltage sources. This paper discussed the development of a lightweight, low-profile, and built-in electric motorcycle (E-Motorcycle) charger that does not take excessive space and compatible with the DC house system. A topology comparison in high switching frequency above 1 MHz using planar magnetics is performed to select the most suitable DC-DC converter. A wide bandgap (WBG) devices are used to achieve high efficiency in high switching frequency and reduce the charger's size. Simulation results and design of the selected topology is presented.

UR - http://www.scopus.com/inward/record.url?scp=85097533092&partnerID=8YFLogxK

U2 - 10.1088/1755-1315/599/1/012024

DO - 10.1088/1755-1315/599/1/012024

M3 - Conference article

AN - SCOPUS:85097533092

SN - 1755-1307

VL - 599

JO - IOP Conference Series: Earth and Environmental Science

JF - IOP Conference Series: Earth and Environmental Science

IS - 1

M1 - 012024

T2 - 2nd International Conference on Green Energy and Environment, ICoGEE 2020

Y2 - 8 October 2020

ER -

Review design of E-Motorcycle charger topology for DC house using planar magnetics

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this