TY - GEN
T1 - Preliminary Design of Fish Hold Insulation on the 5 Gross Tonnage Fishing Boat
AU - Utama, Achmad Fatchur
AU - Huzaifi, Muhammad Hanzalah
AU - Budiyanto, Muhammad Arif
AU - Wibowo, Hadi Tresno
N1 - Funding Information:
The author would like to thanks the Master Thesis Research Assignment for the 2020 Fiscal Year, Ministry of Research and Technology Republic of Indonesia/National Research and Innovation Agency (KEMENRISTEK/BRIN) and the Directorate Research and Development (DRPM) Universitas Indonesia, Main contract Number: 8/E1/KP.PTNBH/2020 and Number:255/PKS/R/UI/2020, UI Contract Number: NKB-509/UN2.RST/HKP.05.00/2020
Publisher Copyright:
© 2022 American Institute of Physics Inc.. All rights reserved.
PY - 2022/11/30
Y1 - 2022/11/30
N2 - Indonesia as a maritime country has enormous capture fisheries potential. On the other hand, the use of technology in catching and cooling fish catches is still very limited. This study aims to design a fish hold insulation for fishing vessels 5 Gross Tonnage as a solution in maintaining the freshness of the fish caught. Fishing boat using flat hull ship design has been used as a study case with the main dimension is length overall 8.2-meter, breadth 2.6-meter, draught 0.8-meter. Based on the calculation standards used, the fish hold insulation design is obtained of 4-meter length, 2-meter width and 1.5-meter height. From all existing load calculations, the total cooling load that must be provided by the evaporator to keep the fish hold room air temperature at 0 ° C is 472.4 Watt.
AB - Indonesia as a maritime country has enormous capture fisheries potential. On the other hand, the use of technology in catching and cooling fish catches is still very limited. This study aims to design a fish hold insulation for fishing vessels 5 Gross Tonnage as a solution in maintaining the freshness of the fish caught. Fishing boat using flat hull ship design has been used as a study case with the main dimension is length overall 8.2-meter, breadth 2.6-meter, draught 0.8-meter. Based on the calculation standards used, the fish hold insulation design is obtained of 4-meter length, 2-meter width and 1.5-meter height. From all existing load calculations, the total cooling load that must be provided by the evaporator to keep the fish hold room air temperature at 0 ° C is 472.4 Watt.
KW - fish hold insulation
KW - Fisheries
KW - fishing boat
KW - flat hull ship
UR - http://www.scopus.com/inward/record.url?scp=85144086108&partnerID=8YFLogxK
U2 - 10.1063/5.0131742
DO - 10.1063/5.0131742
M3 - Conference contribution
AN - SCOPUS:85144086108
T3 - AIP Conference Proceedings
BT - 2021 2nd International Conference on Information Technology, Advanced Mechanical and Electrical Engineering, ICITAMEE 2021
A2 - Jusman, Yessi
A2 - Fajrin, Hanifah Rahmi
PB - American Institute of Physics Inc.
T2 - 2nd International Conference on Information Technology, Advanced Mechanical and Electrical Engineering, ICITAMEE 2021
Y2 - 25 August 2021 through 26 August 2021
ER -