Optimization of Platforming Catalyst Deactivation due to Sintering

Nimrod Alvino, Heri Hermansyah

Research output: Contribution to journalConference article

Abstract

The purpose of this study are to analyze and identify the causes of catalyst deactivation and provide recommendations and solutions to these problems. This research was conducted by identifying phenomena & analyzing the causes of deactivation of catalysts, testing the factors that are the causes of deactivation of catalysts, providing solutions and recommendations and testing these solutions. The results of this study indicate that the decrease in RON values on reformate products is caused by catalyst deactivation due to sintering. The sintering of the catalyst was identified through Regenerator CCR performance which was marked by a decrease in regeneration gas & chlorination gas flow as well as a decrease in the oxygen content of the chlorination gas due to a plugging at the center screen of the CCR Regenerator Tower.

Original languageEnglish
Article number012009
JournalIOP Conference Series: Materials Science and Engineering
Volume742
Issue number1
DOIs
Publication statusPublished - 9 Mar 2020
Event2019 International Conference on Chemical Engineering, ICCE 2019 - Bandung, Indonesia
Duration: 28 Nov 201929 Nov 2019

Fingerprint Dive into the research topics of 'Optimization of Platforming Catalyst Deactivation due to Sintering'. Together they form a unique fingerprint.

  • Cite this