New method of electric sports car body manufacturing using spraying elastic frame fabric

Sudirja; Mohammad Adhitya; R. Danardono Agus Sumarsono

doi:10.1063/1.5046261

New method of electric sports car body manufacturing using spraying elastic frame fabric

Department of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This research discusses about the manufacturing method of electric sports car's body. The contents of this study include literatures, research methods, and results. Focus of this research is on the technique of manufacturing electric sports car's body by spraying the body frame that has been coated with elastic fabric. Two types of fabrics will be used in this study namely lycra and oscar. Mold ring is used as a body frame and the elastic fabric to form the surface is then sprayed by resin to make it harder. After the elastic fabric hardened then fiberglass will be added to strengthen the material. Then tensile test and stress analysis are perfomed to find out the strength and suitability of material. From the test obtained that oscar fabric specimen has better strength than lycra fabric specimen with tensile stress 5 [49] Kg/mm [MPa], 2.26% elongation, and von misses 5.147e+007 N/m while lycra fabric with 4 [39] Kg/mm [MPa] for tensile stress, 2.24% elongation, and von misses 4.083e+007 N/m. According to the experiment it can be conluded that this method only needs the cost around IDR 902,500.00 with easier and even faster for a car body manufacturing process.

Original language	English
Title of host publication	Disruptive Innovation in Mechanical Engineering for Industry Competitiveness
Subtitle of host publication	Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017
Editors	Vivien S. Djanali, Suwarno, Bambang Pramujati, Volodymyr A. Yartys
Publisher	American Institute of Physics Inc.
ISBN (Electronic)	9780735416994
DOIs	https://doi.org/10.1063/1.5046261
Publication status	Published - 13 Jul 2018
Event	3rd International Conference on Mechanical Engineering, ICOME 2017 - Surabaya, Indonesia Duration: 5 Oct 2017 → 6 Oct 2017

Publication series

Name	AIP Conference Proceedings
Volume	1983
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	3rd International Conference on Mechanical Engineering, ICOME 2017
Country/Territory	Indonesia
City	Surabaya
Period	5/10/17 → 6/10/17

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1063/1.5046261

Cite this

Sudirja, Adhitya, M., & Sumarsono, R. D. A. (2018). New method of electric sports car body manufacturing using spraying elastic frame fabric. In V. S. Djanali, Suwarno, B. Pramujati, & V. A. Yartys (Eds.), Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017 Article 040004 (AIP Conference Proceedings; Vol. 1983). American Institute of Physics Inc.. https://doi.org/10.1063/1.5046261

Sudirja, ; Adhitya, Mohammad ; Sumarsono, R. Danardono Agus. / New method of electric sports car body manufacturing using spraying elastic frame fabric. Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017. editor / Vivien S. Djanali ; Suwarno ; Bambang Pramujati ; Volodymyr A. Yartys. American Institute of Physics Inc., 2018. (AIP Conference Proceedings).

@inproceedings{da2f102c815c4cd5831289412e53c6e3,

title = "New method of electric sports car body manufacturing using spraying elastic frame fabric",

abstract = "This research discusses about the manufacturing method of electric sports car's body. The contents of this study include literatures, research methods, and results. Focus of this research is on the technique of manufacturing electric sports car's body by spraying the body frame that has been coated with elastic fabric. Two types of fabrics will be used in this study namely lycra and oscar. Mold ring is used as a body frame and the elastic fabric to form the surface is then sprayed by resin to make it harder. After the elastic fabric hardened then fiberglass will be added to strengthen the material. Then tensile test and stress analysis are perfomed to find out the strength and suitability of material. From the test obtained that oscar fabric specimen has better strength than lycra fabric specimen with tensile stress 5 [49] Kg/mm [MPa], 2.26\% elongation, and von misses 5.147e+007 N/m while lycra fabric with 4 [39] Kg/mm [MPa] for tensile stress, 2.24\% elongation, and von misses 4.083e+007 N/m. According to the experiment it can be conluded that this method only needs the cost around IDR 902,500.00 with easier and even faster for a car body manufacturing process.",

author = "Sudirja and Mohammad Adhitya and Sumarsono, \{R. Danardono Agus\}",

note = "Publisher Copyright: {\textcopyright} 2018 Author(s).; 3rd International Conference on Mechanical Engineering, ICOME 2017 ; Conference date: 05-10-2017 Through 06-10-2017",

year = "2018",

month = jul,

day = "13",

doi = "10.1063/1.5046261",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

editor = "Djanali, \{Vivien S.\} and Suwarno and Bambang Pramujati and Yartys, \{Volodymyr A.\}",

booktitle = "Disruptive Innovation in Mechanical Engineering for Industry Competitiveness",

address = "United States",

}

Sudirja, , Adhitya, M & Sumarsono, RDA 2018, New method of electric sports car body manufacturing using spraying elastic frame fabric. in VS Djanali, Suwarno, B Pramujati & VA Yartys (eds), Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017., 040004, AIP Conference Proceedings, vol. 1983, American Institute of Physics Inc., 3rd International Conference on Mechanical Engineering, ICOME 2017, Surabaya, Indonesia, 5/10/17. https://doi.org/10.1063/1.5046261

New method of electric sports car body manufacturing using spraying elastic frame fabric. / Sudirja, ; Adhitya, Mohammad ; Sumarsono, R. Danardono Agus.
Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017. ed. / Vivien S. Djanali; Suwarno; Bambang Pramujati; Volodymyr A. Yartys. American Institute of Physics Inc., 2018. 040004 (AIP Conference Proceedings; Vol. 1983).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - New method of electric sports car body manufacturing using spraying elastic frame fabric

AU - Sudirja,

AU - Adhitya, Mohammad

AU - Sumarsono, R. Danardono Agus

PY - 2018/7/13

Y1 - 2018/7/13

N2 - This research discusses about the manufacturing method of electric sports car's body. The contents of this study include literatures, research methods, and results. Focus of this research is on the technique of manufacturing electric sports car's body by spraying the body frame that has been coated with elastic fabric. Two types of fabrics will be used in this study namely lycra and oscar. Mold ring is used as a body frame and the elastic fabric to form the surface is then sprayed by resin to make it harder. After the elastic fabric hardened then fiberglass will be added to strengthen the material. Then tensile test and stress analysis are perfomed to find out the strength and suitability of material. From the test obtained that oscar fabric specimen has better strength than lycra fabric specimen with tensile stress 5 [49] Kg/mm [MPa], 2.26% elongation, and von misses 5.147e+007 N/m while lycra fabric with 4 [39] Kg/mm [MPa] for tensile stress, 2.24% elongation, and von misses 4.083e+007 N/m. According to the experiment it can be conluded that this method only needs the cost around IDR 902,500.00 with easier and even faster for a car body manufacturing process.

AB - This research discusses about the manufacturing method of electric sports car's body. The contents of this study include literatures, research methods, and results. Focus of this research is on the technique of manufacturing electric sports car's body by spraying the body frame that has been coated with elastic fabric. Two types of fabrics will be used in this study namely lycra and oscar. Mold ring is used as a body frame and the elastic fabric to form the surface is then sprayed by resin to make it harder. After the elastic fabric hardened then fiberglass will be added to strengthen the material. Then tensile test and stress analysis are perfomed to find out the strength and suitability of material. From the test obtained that oscar fabric specimen has better strength than lycra fabric specimen with tensile stress 5 [49] Kg/mm [MPa], 2.26% elongation, and von misses 5.147e+007 N/m while lycra fabric with 4 [39] Kg/mm [MPa] for tensile stress, 2.24% elongation, and von misses 4.083e+007 N/m. According to the experiment it can be conluded that this method only needs the cost around IDR 902,500.00 with easier and even faster for a car body manufacturing process.

UR - https://www.scopus.com/pages/publications/85050453251

U2 - 10.1063/1.5046261

DO - 10.1063/1.5046261

M3 - Conference contribution

AN - SCOPUS:85050453251

T3 - AIP Conference Proceedings

BT - Disruptive Innovation in Mechanical Engineering for Industry Competitiveness

A2 - Djanali, Vivien S.

A2 - Suwarno, null

A2 - Pramujati, Bambang

A2 - Yartys, Volodymyr A.

PB - American Institute of Physics Inc.

T2 - 3rd International Conference on Mechanical Engineering, ICOME 2017

Y2 - 5 October 2017 through 6 October 2017

ER -

Sudirja , Adhitya M , Sumarsono RDA. New method of electric sports car body manufacturing using spraying elastic frame fabric. In Djanali VS, Suwarno, Pramujati B, Yartys VA, editors, Disruptive Innovation in Mechanical Engineering for Industry Competitiveness: Proceedings of the 3rd International Conference on Mechanical Engineering, ICOME 2017. American Institute of Physics Inc. 2018. 040004. (AIP Conference Proceedings). doi: 10.1063/1.5046261

New method of electric sports car body manufacturing using spraying elastic frame fabric

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this