High transition temperature of SS/MgB2 wire prepared using powder in tube method

S. D. Yudanto, Budhy Kurniawan R., A. Imaduddin, Azwar Manaf

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

MgB2 wire has been prepared by powder in tube method using magnesium and boron powder as raw materials. The powders were mixed and ground using an agate mortar for a half hour. Stainless steel SS316 tube (OD 8 mm/ID 5 mm) was filled with mixed powders, then rolled to 4 mm rectangular shape and sintered at 800 °C for 2 hours. Phases of material, microstructure, and resistivity of the specimen were identified and observed. The resistivity of the specimen was measured using the cryogenic magnet system with four point probe method. The transition temperature of the specimen was found 41.8 K (ΔT = 1.3 K).

Original languageEnglish
Title of host publicationProceedings of the 3rd International Symposium on Current Progress in Mathematics and Sciences 2017, ISCPMS 2017
EditorsRatna Yuniati, Terry Mart, Ivandini T. Anggraningrum, Djoko Triyono, Kiki A. Sugeng
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735417410
DOIs
Publication statusPublished - 22 Oct 2018
Event3rd International Symposium on Current Progress in Mathematics and Sciences 2017, ISCPMS 2017 - Bali, Indonesia
Duration: 26 Jul 201727 Jul 2017

Publication series

NameAIP Conference Proceedings
Volume2023
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

Conference3rd International Symposium on Current Progress in Mathematics and Sciences 2017, ISCPMS 2017
CountryIndonesia
CityBali
Period26/07/1727/07/17

Keywords

  • MgB
  • powder in tube
  • transition temperature
  • wire

Fingerprint Dive into the research topics of 'High transition temperature of SS/MgB<sub>2</sub> wire prepared using powder in tube method'. Together they form a unique fingerprint.

Cite this