Failure analysis of wet solvent stainless steel pipe

Hendy Setiawan; Johny Wahyuadi Mudaryoto

doi:10.1063/5.0066670

Failure analysis of wet solvent stainless steel pipe

Hendy Setiawan, Johny Wahyuadi Mudaryoto

Department of Metallurgical and Material Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The 304L Stainless steel material was found leak due to cracking problem at the several areas during operation less than a year and still in the warranty period from the Contractor. The pipe is used to transport fluid which is steam, styrene and solvent at 155°C operating temperature and connected to stripper vessels. The vessel material itself is duplex. The appearance of cracking is trans-granular crack. Several laboratory tests have been done to find the root cause. And it confirmed chloride stress corrosion cracking occurred, SEM-EDS show the presence of chloride ion.

Original language	English
Title of host publication	PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020)
Pages	040025
DOIs	https://doi.org/10.1063/5.0066670
Publication status	Published - 2021
Event	PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020) - Yogyakarta, Indonesia Duration: 27 Jan 2021 → 28 Jan 2021

Conference

Conference	PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020)
Country/Territory	Indonesia
City	Yogyakarta
Period	27/01/21 → 28/01/21

Access to Document

10.1063/5.0066670

Cite this

@inproceedings{ba983ca69a1543e088da12f118fccca4,

title = "Failure analysis of wet solvent stainless steel pipe",

abstract = "The 304L Stainless steel material was found leak due to cracking problem at the several areas during operation less than a year and still in the warranty period from the Contractor. The pipe is used to transport fluid which is steam, styrene and solvent at 155°C operating temperature and connected to stripper vessels. The vessel material itself is duplex. The appearance of cracking is trans-granular crack. Several laboratory tests have been done to find the root cause. And it confirmed chloride stress corrosion cracking occurred, SEM-EDS show the presence of chloride ion.",

author = "Hendy Setiawan and Mudaryoto, {Johny Wahyuadi}",

year = "2021",

doi = "10.1063/5.0066670",

language = "English",

pages = "040025",

booktitle = "PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020)",

note = "PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020) ; Conference date: 27-01-2021 Through 28-01-2021",

}

Setiawan, H & Mudaryoto, JW 2021, Failure analysis of wet solvent stainless steel pipe. in PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020). pp. 040025, PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020), Yogyakarta, Indonesia, 27/01/21. https://doi.org/10.1063/5.0066670

Failure analysis of wet solvent stainless steel pipe. / Setiawan, Hendy; Mudaryoto, Johny Wahyuadi.
PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020). 2021. p. 040025.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Failure analysis of wet solvent stainless steel pipe

AU - Setiawan, Hendy

AU - Mudaryoto, Johny Wahyuadi

PY - 2021

Y1 - 2021

N2 - The 304L Stainless steel material was found leak due to cracking problem at the several areas during operation less than a year and still in the warranty period from the Contractor. The pipe is used to transport fluid which is steam, styrene and solvent at 155°C operating temperature and connected to stripper vessels. The vessel material itself is duplex. The appearance of cracking is trans-granular crack. Several laboratory tests have been done to find the root cause. And it confirmed chloride stress corrosion cracking occurred, SEM-EDS show the presence of chloride ion.

AB - The 304L Stainless steel material was found leak due to cracking problem at the several areas during operation less than a year and still in the warranty period from the Contractor. The pipe is used to transport fluid which is steam, styrene and solvent at 155°C operating temperature and connected to stripper vessels. The vessel material itself is duplex. The appearance of cracking is trans-granular crack. Several laboratory tests have been done to find the root cause. And it confirmed chloride stress corrosion cracking occurred, SEM-EDS show the presence of chloride ion.

UR - https://pubs.aip.org/aip/acp/article/1027262

U2 - 10.1063/5.0066670

DO - 10.1063/5.0066670

M3 - Conference contribution

SP - 040025

BT - PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020)

T2 - PROCEEDINGS OF THE 13TH AUN/SEED-NET REGIONAL CONFERENCE ON MATERIALS (RCM 2020) AND THE 1ST INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND MANUFACTURING (ICMEM 2020)

Y2 - 27 January 2021 through 28 January 2021

ER -

Failure analysis of wet solvent stainless steel pipe

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this