Fabrication of low cost perovskite solar cell under ambient conditions using only spin coating deposition method

Michael Hariadi, Istighfari Dzikri, Retno Wigajatri Purnamaningsih, Nji Raden Poespawati

Research output: Contribution to journalConference articlepeer-review

7 Citations (Scopus)

Abstract

Indonesia is an archipelagic nation that has many small islands where the average load is low and currently supplied by diesel power generators. The drawbacks from these generators are cost constraints from its operation. Solar cells are the solution of this problem with the support of daily average radiation in Indonesia of 4.8 kWh/m 2 /day. There has been a lot of technology for the construction of solar cells such as silicon based, copper indium gallium selenide (CIGS), which was already successfully commercialized. However, these technologies have been obsolete and started to reach its maximum potential. Perovskite solar cells have a very high future potential, due to the increase on the efficiency of this technology in a relatively short amount of time. The current challenge for the fabrication of perovskite solar cell is the material cost and fabrication cost. This paper discussed the low-cost fabrication of perovskite solar cell using only spin coating deposition method and relatively also low-cost materials for the structure of the perovskite solar cell itself. As a result, we achieve perovskite solar cell with VOC of 0.6 V, ISC of 13 mA, FF of 0.28, and 1.2% efficiency.

Original languageEnglish
Article number01022
JournalE3S Web of Conferences
Volume67
DOIs
Publication statusPublished - 26 Nov 2018
Event3rd International Tropical Renewable Energy Conference "Sustainable Development of Tropical Renewable Energy", i-TREC 2018 - Kuta, Bali, Indonesia
Duration: 6 Sep 20188 Sep 2018

Fingerprint Dive into the research topics of 'Fabrication of low cost perovskite solar cell under ambient conditions using only spin coating deposition method'. Together they form a unique fingerprint.

Cite this