Fabrication of hydroxyapatite coating on commercially pure ti by electrophoretic deposition technique

Sri Rahmadani, Anawati Anawati, I. Nyoman Jujur, Razie Hanafi

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

2 Citations (Scopus)

Abstract

Hydroxyapatite (HA) coating was deposited on commercially pure Ti to improve its biocompatibility as a biomedical implant material. The HA layer was deposited by the electrophoretic deposition (EPD) method. The processing parameters controlled the HA structure. In this research, the applied voltage was varied 20, 30, and 40 V to optimize a free-crack layer. The current output during EPD at 20 V was in the order of 10-5 A/cm2 . A higher current density in the order of 10-4 A/cm2 was obtained at 30 and 40 V. The coating formed at 20 V was relatively free of crack. A high number of cracks began to observe in the layer formed at 30 V, while only a few cracks were revealed on the layer formed at 40 V. The average thickness of the HA layer increased slightly with applied voltage. The thickness was approximately 40±5 µm, as observed by an optical microscope. The optimum voltage to produce a thick HA layer with a small number of cracks was at 40 V.

Original languageEnglish
Title of host publicationPhysics Symposium
Subtitle of host publicationKey Research in Materials Science
EditorsAyi Bahtiar, Togar Saragi, Sahrul Hidayat, Lusi Safriani
PublisherTrans Tech Publications Ltd
Pages239-243
Number of pages5
ISBN (Print)9783035716979
DOIs
Publication statusPublished - 2020
Event4th Padjadjaran International Physics Symposium, PIPS 2019 - Bandung, Indonesia
Duration: 13 Nov 201914 Nov 2019

Publication series

NameKey Engineering Materials
Volume860 KEM
ISSN (Print)1013-9826
ISSN (Electronic)1662-9795

Conference

Conference4th Padjadjaran International Physics Symposium, PIPS 2019
Country/TerritoryIndonesia
CityBandung
Period13/11/1914/11/19

Keywords

  • Coating
  • Electrophoretic deposition
  • Hydroxyapatite
  • Titanium

Fingerprint

Dive into the research topics of 'Fabrication of hydroxyapatite coating on commercially pure ti by electrophoretic deposition technique'. Together they form a unique fingerprint.

Cite this