Experimental and modeling of electrical resistivity changes due to micro-spatial distribution of fluid for unconsolidated sand

Muhammad Bisri Mustofa, Umar Fauzi, Fourier Dzar Eljabbar Latief, Warsa Warsa

Research output: Contribution to journalArticlepeer-review

4 Citations (Scopus)

Abstract

Electrical resistivity measurements of reservoir rocks are usually applied to identify fluid type and saturation. Although it has been widely studied, the effect of fluid saturation on electrical resistivity is not yet fully understood, especially when considering the spatial distribution of fluids. Hysteresis and electrical resistivity jump in the imbibition process are two of the phenomena that remain unclear. Microscopical evaluation would be useful in understanding these phenomena. In this paper, we analyzed the influence of the micro-spatial distribution of fluids on electrical resistivity. In order to achieve the objective, laboratory measurements and computer modeling of electrical resistivity were carried out. Measurements were made on unconsolidated sand samples that were saturated with brine. Two categories of samples were prepared based on the position of the brine injection to obtain fluid spatial distribution variations in rock pores. Measurement results showed that the electrical resistivity varies depending on the brine injection position. Subsequently, 3-D microcomputed tomography images were acquired to analyze sample microstructure and model fluid spatial distribution. We implemented three different saturation models made up of varying fluid filling mechanisms onto digital images of samples, then used them to compute the electrical resistivity of the sub-sample using the finite element method. The measurement and calculation of electrical resistivity showed good agreement. These results indicate that the proposed model is capable of representing spatial fluid distribution in pore spaces of measured samples. This fluid distribution is most responsible for the variation of the electrical resistivity in the samples. Furthermore, the electrical resistivity jump phenomenon in the imbibition process was successfully explained through the proposed model. Based on this study's results, it can be concluded that the spatial distribution of fluids needs to be considered in the estimation of electrical resistivity. The research findings provide insight into how micro-spatial distribution affects electrical properties of rocks of importance to the interpretation of electrical resistivity data.

Original languageEnglish
Article number109472
JournalJournal of Petroleum Science and Engineering
Volume208
DOIs
Publication statusPublished - Jan 2022

Keywords

  • Digital sample image
  • Electrical resistivity
  • Micro-spatial distribution of fluid
  • Unconsolidated sand

Fingerprint

Dive into the research topics of 'Experimental and modeling of electrical resistivity changes due to micro-spatial distribution of fluid for unconsolidated sand'. Together they form a unique fingerprint.

Cite this