Effect of solution treatment temperature on microstructure and mechanical properties of al-5.1Zn-2Mg-0.1Ti (wt. %) produced by squeeze casting

Keyphrases

• Mechanical Properties 100%
• Aging Process 100%
• Solution Treatment 100%
• Microstructure Properties 100%
• Squeeze Casting 100%
• Ti Addition 100%
• Solution Treatment Temperature 100%
• X Ray Diffraction 50%
• Scanning Electron Microscopy/energy Dispersive Spectroscopy 50%
• Al Alloy 50%
• Optical Microscope 50%
• Hardness Test 50%
• Aging 50%
• Grain Refiner 50%
• As-cast 50%
• Low Hardness 50%
• Precipitation Hardening 50%
• 7xxx Aluminum Alloy 50%
• Rockwell Hardness 50%
• Rapid Quenching 50%
• Simultaneous Thermal Analysis 50%
• Second Phase Dissolution 50%
• Increasing Solution 50%
• In Alloy 50%
• Phase Volume Fraction 50%
• Heat Treatable 50%

Engineering

• Squeeze Casting 100%
• Ray Diffraction 50%
• Optical Microscope 50%
• Hardness Testing 50%
• Grain Refiner 50%
• Al Alloy 50%
• Cast Alloy 50%
• Rapid Quenching 50%
• Precipitation Hardening 50%

Material Science

• Squeeze Casting 100%
• X-Ray Diffraction 50%
• Scanning Electron Microscopy 50%
• Volume Fraction 50%
• Thermal Analysis 50%
• Age Hardening 50%
• Cast Alloy 50%