Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application

Indah Uswatun Hasanah; Dedi Priadi; Suryana; Muhammad Kaffi

doi:10.1063/5.0016355

Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application

Indah Uswatun Hasanah, Dedi Priadi, Suryana, Muhammad Kaffi

Department of Metallurgical and Material Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The effects of heat treatment on microstructure and mechanical properties of stir casting AMC were studied. Aluminium ADC12 composite was fabricated by various aging temperature heat treatment and time. The effect of aging temperature has been studied with variation 135, 190, and 240 °C and under various times for 6, 8, and 10 h. In the fabricated AMC some different tests were conducted to show mechanical properties. Micro-structural characterization of materials was also done. The results show that the age hardening condition for of ADC12 aluminium alloy was 190 °C for 6 h was sufficient to achieve the highest hardness of 88 HRB and highest tensile of 231 MPa. This was due to the appropriate refinement of distribution of graphite.

Original language	English
Title of host publication	1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019
Editors	Daisman Purnomo Bayyu Aji, Triyono Triyono, Fethma M. Nor
Publisher	American Institute of Physics Inc.
ISBN (Electronic)	9780735420229
DOIs	https://doi.org/10.1063/5.0016355
Publication status	Published - 17 Sept 2020
Event	1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019 - Jakarta, Indonesia Duration: 12 Dec 2019 → 13 Dec 2019

Publication series

Name	AIP Conference Proceedings
Volume	2262
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019
Country/Territory	Indonesia
City	Jakarta
Period	12/12/19 → 13/12/19

Access to Document

10.1063/5.0016355

Cite this

Hasanah, I. U., Priadi, D., Suryana, & Kaffi, M. (2020). Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application. In D. P. B. Aji, T. Triyono, & F. M. Nor (Eds.), 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019 Article 40004 (AIP Conference Proceedings; Vol. 2262). American Institute of Physics Inc.. https://doi.org/10.1063/5.0016355

Hasanah, Indah Uswatun ; Priadi, Dedi ; Suryana et al. / Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application. 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019. editor / Daisman Purnomo Bayyu Aji ; Triyono Triyono ; Fethma M. Nor. American Institute of Physics Inc., 2020. (AIP Conference Proceedings).

@inproceedings{3ca7b756e67b475bac49a6e2c037c156,

title = "Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application",

abstract = "The effects of heat treatment on microstructure and mechanical properties of stir casting AMC were studied. Aluminium ADC12 composite was fabricated by various aging temperature heat treatment and time. The effect of aging temperature has been studied with variation 135, 190, and 240 °C and under various times for 6, 8, and 10 h. In the fabricated AMC some different tests were conducted to show mechanical properties. Micro-structural characterization of materials was also done. The results show that the age hardening condition for of ADC12 aluminium alloy was 190 °C for 6 h was sufficient to achieve the highest hardness of 88 HRB and highest tensile of 231 MPa. This was due to the appropriate refinement of distribution of graphite.",

author = "Hasanah, {Indah Uswatun} and Dedi Priadi and Suryana and Muhammad Kaffi",

note = "Publisher Copyright: {\textcopyright} 2020 American Institute of Physics Inc.. All rights reserved.; 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019 ; Conference date: 12-12-2019 Through 13-12-2019",

year = "2020",

month = sep,

day = "17",

doi = "10.1063/5.0016355",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

editor = "Aji, {Daisman Purnomo Bayyu} and Triyono Triyono and Nor, {Fethma M.}",

booktitle = "1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019",

}

Hasanah, IU, Priadi, D, Suryana & Kaffi, M 2020, Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application. in DPB Aji, T Triyono & FM Nor (eds), 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019., 40004, AIP Conference Proceedings, vol. 2262, American Institute of Physics Inc., 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019, Jakarta, Indonesia, 12/12/19. https://doi.org/10.1063/5.0016355

Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application. / Hasanah, Indah Uswatun; Priadi, Dedi; Suryana et al.
1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019. ed. / Daisman Purnomo Bayyu Aji; Triyono Triyono; Fethma M. Nor. American Institute of Physics Inc., 2020. 40004 (AIP Conference Proceedings; Vol. 2262).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application

AU - Hasanah, Indah Uswatun

AU - Priadi, Dedi

AU - Suryana,

AU - Kaffi, Muhammad

PY - 2020/9/17

Y1 - 2020/9/17

N2 - The effects of heat treatment on microstructure and mechanical properties of stir casting AMC were studied. Aluminium ADC12 composite was fabricated by various aging temperature heat treatment and time. The effect of aging temperature has been studied with variation 135, 190, and 240 °C and under various times for 6, 8, and 10 h. In the fabricated AMC some different tests were conducted to show mechanical properties. Micro-structural characterization of materials was also done. The results show that the age hardening condition for of ADC12 aluminium alloy was 190 °C for 6 h was sufficient to achieve the highest hardness of 88 HRB and highest tensile of 231 MPa. This was due to the appropriate refinement of distribution of graphite.

AB - The effects of heat treatment on microstructure and mechanical properties of stir casting AMC were studied. Aluminium ADC12 composite was fabricated by various aging temperature heat treatment and time. The effect of aging temperature has been studied with variation 135, 190, and 240 °C and under various times for 6, 8, and 10 h. In the fabricated AMC some different tests were conducted to show mechanical properties. Micro-structural characterization of materials was also done. The results show that the age hardening condition for of ADC12 aluminium alloy was 190 °C for 6 h was sufficient to achieve the highest hardness of 88 HRB and highest tensile of 231 MPa. This was due to the appropriate refinement of distribution of graphite.

UR - http://www.scopus.com/inward/record.url?scp=85092061236&partnerID=8YFLogxK

U2 - 10.1063/5.0016355

DO - 10.1063/5.0016355

M3 - Conference contribution

AN - SCOPUS:85092061236

T3 - AIP Conference Proceedings

BT - 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019

A2 - Aji, Daisman Purnomo Bayyu

A2 - Triyono, Triyono

A2 - Nor, Fethma M.

PB - American Institute of Physics Inc.

T2 - 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019

Y2 - 12 December 2019 through 13 December 2019

ER -

Hasanah IU, Priadi D, Suryana, Kaffi M. Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application. In Aji DPB, Triyono T, Nor FM, editors, 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019. American Institute of Physics Inc. 2020. 40004. (AIP Conference Proceedings). doi: 10.1063/5.0016355

Effect of heat treatment on microstructure and mechanical aluminium matrix composite (AMC) by stir casting method for automotive application

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this