Design rules based on build orientation for polylactic acid

Aghnia Ilmiah Nurhudan; Sugeng Supriadi; Yudan Whulanza; Agung Shamsuddin Saragih; Muhammad Hussain Ismail

doi:10.1063/5.0145132

Design rules based on build orientation for polylactic acid

Aghnia Ilmiah Nurhudan, Sugeng Supriadi, Yudan Whulanza, Agung Shamsuddin Saragih, Muhammad Hussain Ismail

Department of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This study aims to analyze the design rules in making a specimen or object based on position orientation to know the effect of build orientation. The direction of the position used consists of seven variations of angles, including 0°, 15°, 30°, 45°, 60°, 75°, and 90°. All variations are fabricated using the FDM Creality Ender 5 machine and then tested in the form of a tensile test. The greatest strength of the specimen is the 90° in orientation position with a value of 30.6 MPa. In comparison, the most negligible strength is the 0° in orientation position with a 7.5 MPa. This analysis is related to the parameters that affect the printing results, such as orientation of the print position, quality of the material, printing temperature, and size of each layer.

Original language	English
Title of host publication	AIP Conference Proceedings
Editors	Andyka Kusuma, Jaka Fajar Fatriansyah, Radon Dhelika, Mochamad Adhiraga Pratama, Ridho Irwansyah, Imam Jauhari Maknun, Wahyuaji Narottama Putra, Romadhani Ardi, Ruki Harwahyu, Yulia Nurliani Harahap, Kenny Lischer
Publisher	American Institute of Physics Inc.
Edition	1
ISBN (Electronic)	9780735446410
DOIs	https://doi.org/10.1063/5.0145132
Publication status	Published - 6 Feb 2024
Event	17th International Conference on Quality in Research, QiR 2021 in conjunction with the International Tropical Renewable Energy Conference 2021, I-Trec 2021 and the 2nd AUN-SCUD International Conference, CAIC-SIUD - Virtual, Online, India Duration: 13 Oct 2021 → 15 Oct 2021

Publication series

Name	AIP Conference Proceedings
Number	1
Volume	2710
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	17th International Conference on Quality in Research, QiR 2021 in conjunction with the International Tropical Renewable Energy Conference 2021, I-Trec 2021 and the 2nd AUN-SCUD International Conference, CAIC-SIUD
Country/Territory	India
City	Virtual, Online
Period	13/10/21 → 15/10/21

Access to Document

10.1063/5.0145132

Cite this

Nurhudan, A. I., Supriadi, S., Whulanza, Y., Saragih, A. S., & Ismail, M. H. (2024). Design rules based on build orientation for polylactic acid. In A. Kusuma, J. F. Fatriansyah, R. Dhelika, M. A. Pratama, R. Irwansyah, I. J. Maknun, W. N. Putra, R. Ardi, R. Harwahyu, Y. N. Harahap, & K. Lischer (Eds.), AIP Conference Proceedings (1 ed.). Article 030007 (AIP Conference Proceedings; Vol. 2710, No. 1). American Institute of Physics Inc.. https://doi.org/10.1063/5.0145132

Nurhudan, Aghnia Ilmiah ; Supriadi, Sugeng ; Whulanza, Yudan et al. / Design rules based on build orientation for polylactic acid. AIP Conference Proceedings. editor / Andyka Kusuma ; Jaka Fajar Fatriansyah ; Radon Dhelika ; Mochamad Adhiraga Pratama ; Ridho Irwansyah ; Imam Jauhari Maknun ; Wahyuaji Narottama Putra ; Romadhani Ardi ; Ruki Harwahyu ; Yulia Nurliani Harahap ; Kenny Lischer. 1. ed. American Institute of Physics Inc., 2024. (AIP Conference Proceedings; 1).

@inproceedings{21e1c99f7776425db81c4bbbd2c03475,

title = "Design rules based on build orientation for polylactic acid",

abstract = "This study aims to analyze the design rules in making a specimen or object based on position orientation to know the effect of build orientation. The direction of the position used consists of seven variations of angles, including 0°, 15°, 30°, 45°, 60°, 75°, and 90°. All variations are fabricated using the FDM Creality Ender 5 machine and then tested in the form of a tensile test. The greatest strength of the specimen is the 90° in orientation position with a value of 30.6 MPa. In comparison, the most negligible strength is the 0° in orientation position with a 7.5 MPa. This analysis is related to the parameters that affect the printing results, such as orientation of the print position, quality of the material, printing temperature, and size of each layer.",

author = "Nurhudan, {Aghnia Ilmiah} and Sugeng Supriadi and Yudan Whulanza and Saragih, {Agung Shamsuddin} and Ismail, {Muhammad Hussain}",

note = "Publisher Copyright: {\textcopyright} 2024 Author(s).; 17th International Conference on Quality in Research, QiR 2021 in conjunction with the International Tropical Renewable Energy Conference 2021, I-Trec 2021 and the 2nd AUN-SCUD International Conference, CAIC-SIUD ; Conference date: 13-10-2021 Through 15-10-2021",

year = "2024",

month = feb,

day = "6",

doi = "10.1063/5.0145132",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

number = "1",

editor = "Andyka Kusuma and Fatriansyah, {Jaka Fajar} and Radon Dhelika and Pratama, {Mochamad Adhiraga} and Ridho Irwansyah and Maknun, {Imam Jauhari} and Putra, {Wahyuaji Narottama} and Romadhani Ardi and Ruki Harwahyu and Harahap, {Yulia Nurliani} and Kenny Lischer",

booktitle = "AIP Conference Proceedings",

address = "United States",

edition = "1",

}

Nurhudan, AI, Supriadi, S , Whulanza, Y , Saragih, AS & Ismail, MH 2024, Design rules based on build orientation for polylactic acid. in A Kusuma, JF Fatriansyah, R Dhelika, MA Pratama, R Irwansyah, IJ Maknun, WN Putra, R Ardi, R Harwahyu, YN Harahap & K Lischer (eds), AIP Conference Proceedings. 1 edn, 030007, AIP Conference Proceedings, no. 1, vol. 2710, American Institute of Physics Inc., 17th International Conference on Quality in Research, QiR 2021 in conjunction with the International Tropical Renewable Energy Conference 2021, I-Trec 2021 and the 2nd AUN-SCUD International Conference, CAIC-SIUD, Virtual, Online, India, 13/10/21. https://doi.org/10.1063/5.0145132

Design rules based on build orientation for polylactic acid. / Nurhudan, Aghnia Ilmiah; Supriadi, Sugeng ; Whulanza, Yudan et al.
AIP Conference Proceedings. ed. / Andyka Kusuma; Jaka Fajar Fatriansyah; Radon Dhelika; Mochamad Adhiraga Pratama; Ridho Irwansyah; Imam Jauhari Maknun; Wahyuaji Narottama Putra; Romadhani Ardi; Ruki Harwahyu; Yulia Nurliani Harahap; Kenny Lischer. 1. ed. American Institute of Physics Inc., 2024. 030007 (AIP Conference Proceedings; Vol. 2710, No. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design rules based on build orientation for polylactic acid

AU - Nurhudan, Aghnia Ilmiah

AU - Supriadi, Sugeng

AU - Whulanza, Yudan

AU - Saragih, Agung Shamsuddin

AU - Ismail, Muhammad Hussain

PY - 2024/2/6

Y1 - 2024/2/6

N2 - This study aims to analyze the design rules in making a specimen or object based on position orientation to know the effect of build orientation. The direction of the position used consists of seven variations of angles, including 0°, 15°, 30°, 45°, 60°, 75°, and 90°. All variations are fabricated using the FDM Creality Ender 5 machine and then tested in the form of a tensile test. The greatest strength of the specimen is the 90° in orientation position with a value of 30.6 MPa. In comparison, the most negligible strength is the 0° in orientation position with a 7.5 MPa. This analysis is related to the parameters that affect the printing results, such as orientation of the print position, quality of the material, printing temperature, and size of each layer.

AB - This study aims to analyze the design rules in making a specimen or object based on position orientation to know the effect of build orientation. The direction of the position used consists of seven variations of angles, including 0°, 15°, 30°, 45°, 60°, 75°, and 90°. All variations are fabricated using the FDM Creality Ender 5 machine and then tested in the form of a tensile test. The greatest strength of the specimen is the 90° in orientation position with a value of 30.6 MPa. In comparison, the most negligible strength is the 0° in orientation position with a 7.5 MPa. This analysis is related to the parameters that affect the printing results, such as orientation of the print position, quality of the material, printing temperature, and size of each layer.

UR - http://www.scopus.com/inward/record.url?scp=85185800602&partnerID=8YFLogxK

U2 - 10.1063/5.0145132

DO - 10.1063/5.0145132

M3 - Conference contribution

AN - SCOPUS:85185800602

T3 - AIP Conference Proceedings

BT - AIP Conference Proceedings

A2 - Kusuma, Andyka

A2 - Fatriansyah, Jaka Fajar

A2 - Dhelika, Radon

A2 - Pratama, Mochamad Adhiraga

A2 - Irwansyah, Ridho

A2 - Maknun, Imam Jauhari

A2 - Putra, Wahyuaji Narottama

A2 - Ardi, Romadhani

A2 - Harwahyu, Ruki

A2 - Harahap, Yulia Nurliani

A2 - Lischer, Kenny

PB - American Institute of Physics Inc.

T2 - 17th International Conference on Quality in Research, QiR 2021 in conjunction with the International Tropical Renewable Energy Conference 2021, I-Trec 2021 and the 2nd AUN-SCUD International Conference, CAIC-SIUD

Y2 - 13 October 2021 through 15 October 2021

ER -

Nurhudan AI, Supriadi S , Whulanza Y , Saragih AS, Ismail MH. Design rules based on build orientation for polylactic acid. In Kusuma A, Fatriansyah JF, Dhelika R, Pratama MA, Irwansyah R, Maknun IJ, Putra WN, Ardi R, Harwahyu R, Harahap YN, Lischer K, editors, AIP Conference Proceedings. 1 ed. American Institute of Physics Inc. 2024. 030007. (AIP Conference Proceedings; 1). doi: 10.1063/5.0145132

Design rules based on build orientation for polylactic acid

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this