Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz

Gunawan Wibisono; Daniel Simanjuntak; Taufiq Alif Kurniawan; Purnomo Sidi Priambodo

doi:10.1109/COMNETSAT.2013.6870873

Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz

Gunawan Wibisono, Daniel Simanjuntak, Taufiq Alif Kurniawan, Purnomo Sidi Priambodo

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

Radio-Frequency Identification (RFID) has become a technology segment that growth rapidly in data collecting industry and automatic identification. One of the most important part of RFID system is power amplifier that enable power transfer between reader and transponder for identification purpose. This research is proposed power amplifier class E for RFID application at frequency of 13.56 MHz. It is shown from the results that the proposed power amplifier had a very good performences on return loss both on input and output, gain, stability, and efficiency.

Original language	English
Title of host publication	Proceeding - IEEE COMNETSAT 2013
Subtitle of host publication	IEEE International Conference on Communication, Networks and Satellite
Publisher	IEEE Computer Society
Pages	120-123
Number of pages	4
ISBN (Print)	9781467360562
DOIs	https://doi.org/10.1109/COMNETSAT.2013.6870873
Publication status	Published - 2013
Event	2013 IEEE International Conference on Communication, Networks and Satellite, IEEE COMNETSAT 2013 - Yogyakarta, Indonesia Duration: 3 Dec 2013 → 4 Dec 2013

Publication series

Name	Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite

Conference

Conference	2013 IEEE International Conference on Communication, Networks and Satellite, IEEE COMNETSAT 2013
Country/Territory	Indonesia
City	Yogyakarta
Period	3/12/13 → 4/12/13

Keywords

class E
efficiency
gain
return loss
rfid
stability

Access to Document

10.1109/COMNETSAT.2013.6870873

Cite this

Wibisono, G., Simanjuntak, D., Kurniawan, T. A., & Priambodo, P. S. (2013). Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz. In Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite (pp. 120-123). Article 6870873 (Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite). IEEE Computer Society. https://doi.org/10.1109/COMNETSAT.2013.6870873

Wibisono, Gunawan ; Simanjuntak, Daniel ; Kurniawan, Taufiq Alif et al. / Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz. Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite. IEEE Computer Society, 2013. pp. 120-123 (Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite).

@inproceedings{daecea46682e4c22b94ce7518efdcebe,

title = "Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz",

abstract = "Radio-Frequency Identification (RFID) has become a technology segment that growth rapidly in data collecting industry and automatic identification. One of the most important part of RFID system is power amplifier that enable power transfer between reader and transponder for identification purpose. This research is proposed power amplifier class E for RFID application at frequency of 13.56 MHz. It is shown from the results that the proposed power amplifier had a very good performences on return loss both on input and output, gain, stability, and efficiency.",

keywords = "class E, efficiency, gain, return loss, rfid, stability",

author = "Gunawan Wibisono and Daniel Simanjuntak and Kurniawan, {Taufiq Alif} and Priambodo, {Purnomo Sidi}",

year = "2013",

doi = "10.1109/COMNETSAT.2013.6870873",

language = "English",

isbn = "9781467360562",

series = "Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite",

publisher = "IEEE Computer Society",

pages = "120--123",

booktitle = "Proceeding - IEEE COMNETSAT 2013",

address = "United States",

note = "2013 IEEE International Conference on Communication, Networks and Satellite, IEEE COMNETSAT 2013 ; Conference date: 03-12-2013 Through 04-12-2013",

}

Wibisono, G, Simanjuntak, D, Kurniawan, TA & Priambodo, PS 2013, Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz. in Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite., 6870873, Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite, IEEE Computer Society, pp. 120-123, 2013 IEEE International Conference on Communication, Networks and Satellite, IEEE COMNETSAT 2013, Yogyakarta, Indonesia, 3/12/13. https://doi.org/10.1109/COMNETSAT.2013.6870873

Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz. / Wibisono, Gunawan; Simanjuntak, Daniel; Kurniawan, Taufiq Alif et al.
Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite. IEEE Computer Society, 2013. p. 120-123 6870873 (Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz

AU - Wibisono, Gunawan

AU - Simanjuntak, Daniel

AU - Kurniawan, Taufiq Alif

AU - Priambodo, Purnomo Sidi

PY - 2013

Y1 - 2013

N2 - Radio-Frequency Identification (RFID) has become a technology segment that growth rapidly in data collecting industry and automatic identification. One of the most important part of RFID system is power amplifier that enable power transfer between reader and transponder for identification purpose. This research is proposed power amplifier class E for RFID application at frequency of 13.56 MHz. It is shown from the results that the proposed power amplifier had a very good performences on return loss both on input and output, gain, stability, and efficiency.

AB - Radio-Frequency Identification (RFID) has become a technology segment that growth rapidly in data collecting industry and automatic identification. One of the most important part of RFID system is power amplifier that enable power transfer between reader and transponder for identification purpose. This research is proposed power amplifier class E for RFID application at frequency of 13.56 MHz. It is shown from the results that the proposed power amplifier had a very good performences on return loss both on input and output, gain, stability, and efficiency.

KW - class E

KW - efficiency

KW - gain

KW - return loss

KW - rfid

KW - stability

UR - http://www.scopus.com/inward/record.url?scp=84906678553&partnerID=8YFLogxK

U2 - 10.1109/COMNETSAT.2013.6870873

DO - 10.1109/COMNETSAT.2013.6870873

M3 - Conference contribution

AN - SCOPUS:84906678553

SN - 9781467360562

T3 - Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite

SP - 120

EP - 123

BT - Proceeding - IEEE COMNETSAT 2013

PB - IEEE Computer Society

T2 - 2013 IEEE International Conference on Communication, Networks and Satellite, IEEE COMNETSAT 2013

Y2 - 3 December 2013 through 4 December 2013

ER -

Wibisono G, Simanjuntak D, Kurniawan TA , Priambodo PS. Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz. In Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite. IEEE Computer Society. 2013. p. 120-123. 6870873. (Proceeding - IEEE COMNETSAT 2013: IEEE International Conference on Communication, Networks and Satellite). doi: 10.1109/COMNETSAT.2013.6870873

Design of Power amplifier for Radio-Frequency Identification application on 13.56 MHz

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this