Constructing total suspended solid modelling on Agathis Lake by employing resource modelling associates program

R. M.S. Prastica; H. Soeryantono; D. R. Marthanty

doi:10.1088/1755-1315/311/1/012009

Constructing total suspended solid modelling on Agathis Lake by employing resource modelling associates program

R. M.S. Prastica, H. Soeryantono, D. R. Marthanty

Department of Civil Engineering

Research output: Contribution to journal › Conference article › peer-review

Abstract

This research uses Resource Modelling Associate (RMA) program to conduct a two-dimension model of Agathis Lake to analyse velocity and sediment transport distribution. The main programs are RMA-10 for velocity distribution and RMA-11 for the pollutant distribution. The sediment transport focuses on total suspended solids (TSS) pollutant. The research aims to construct total suspended solid model. Firstly, RMA Generation produces mesh of Agathis Lake. Next, RMA-10 and RMA-11 would perform both velocity and TSS simulation model to represent the actual condition. This research still gives temporary result due to limited sampling data. Calibration analysis of the model is needed to make the result of the program more accurate and more representative to the real condition.

Original language	English
Article number	012009
Journal	IOP Conference Series: Earth and Environmental Science
Volume	311
Issue number	1
DOIs	https://doi.org/10.1088/1755-1315/311/1/012009
Publication status	Published - 15 Aug 2019
Event	Padjadjaran Earth Dialogues: International Symposium on Geophysical Issues, PEDISGI 2018 - Bandung, Indonesia Duration: 2 Jul 2018 → 4 Jul 2018

Access to Document

10.1088/1755-1315/311/1/012009

Cite this

@article{cc68079214da4126b250e2e732a800a9,

title = "Constructing total suspended solid modelling on Agathis Lake by employing resource modelling associates program",

abstract = "This research uses Resource Modelling Associate (RMA) program to conduct a two-dimension model of Agathis Lake to analyse velocity and sediment transport distribution. The main programs are RMA-10 for velocity distribution and RMA-11 for the pollutant distribution. The sediment transport focuses on total suspended solids (TSS) pollutant. The research aims to construct total suspended solid model. Firstly, RMA Generation produces mesh of Agathis Lake. Next, RMA-10 and RMA-11 would perform both velocity and TSS simulation model to represent the actual condition. This research still gives temporary result due to limited sampling data. Calibration analysis of the model is needed to make the result of the program more accurate and more representative to the real condition.",

author = "Prastica, {R. M.S.} and H. Soeryantono and Marthanty, {D. R.}",

year = "2019",

month = aug,

day = "15",

doi = "10.1088/1755-1315/311/1/012009",

language = "English",

volume = "311",

journal = "IOP Conference Series: Earth and Environmental Science",

issn = "1755-1307",

publisher = "IOP Publishing Ltd.",

number = "1",

note = "Padjadjaran Earth Dialogues: International Symposium on Geophysical Issues, PEDISGI 2018 ; Conference date: 02-07-2018 Through 04-07-2018",

}

TY - JOUR

T1 - Constructing total suspended solid modelling on Agathis Lake by employing resource modelling associates program

AU - Prastica, R. M.S.

AU - Soeryantono, H.

AU - Marthanty, D. R.

PY - 2019/8/15

Y1 - 2019/8/15

N2 - This research uses Resource Modelling Associate (RMA) program to conduct a two-dimension model of Agathis Lake to analyse velocity and sediment transport distribution. The main programs are RMA-10 for velocity distribution and RMA-11 for the pollutant distribution. The sediment transport focuses on total suspended solids (TSS) pollutant. The research aims to construct total suspended solid model. Firstly, RMA Generation produces mesh of Agathis Lake. Next, RMA-10 and RMA-11 would perform both velocity and TSS simulation model to represent the actual condition. This research still gives temporary result due to limited sampling data. Calibration analysis of the model is needed to make the result of the program more accurate and more representative to the real condition.

AB - This research uses Resource Modelling Associate (RMA) program to conduct a two-dimension model of Agathis Lake to analyse velocity and sediment transport distribution. The main programs are RMA-10 for velocity distribution and RMA-11 for the pollutant distribution. The sediment transport focuses on total suspended solids (TSS) pollutant. The research aims to construct total suspended solid model. Firstly, RMA Generation produces mesh of Agathis Lake. Next, RMA-10 and RMA-11 would perform both velocity and TSS simulation model to represent the actual condition. This research still gives temporary result due to limited sampling data. Calibration analysis of the model is needed to make the result of the program more accurate and more representative to the real condition.

UR - http://www.scopus.com/inward/record.url?scp=85071923542&partnerID=8YFLogxK

U2 - 10.1088/1755-1315/311/1/012009

DO - 10.1088/1755-1315/311/1/012009

M3 - Conference article

AN - SCOPUS:85071923542

VL - 311

JO - IOP Conference Series: Earth and Environmental Science

JF - IOP Conference Series: Earth and Environmental Science

SN - 1755-1307

IS - 1

M1 - 012009

T2 - Padjadjaran Earth Dialogues: International Symposium on Geophysical Issues, PEDISGI 2018

Y2 - 2 July 2018 through 4 July 2018

ER -

Constructing total suspended solid modelling on Agathis Lake by employing resource modelling associates program

Abstract

Access to Document

Other files and links

Fingerprint

Cite this