Ceramic industry generates glaze wastewater and clay waste. Glaze wastewater contains heavy metal from ceramic painting process which can potentially cause severe pollution problem. Glaze wastewater from PT.X typically contains Cd (0.013 mg/L); Cu (0.033 mg/L); Pb (1.20 mg/L); and Zn (7.00 mg/L). Clay waste used as adsorbent to reduce heavy metal amount in glaze wastewater. The present study investigates in bench scale and uses batch adsorption method to determine effective adsorbent amount and contact time in removing heavy metals in glaze wastewater in order to fulfill the discharge requirement based on regulation of Minister of Environment No.16/2008concerning effluent water standard for ceramic industries. The results showed that the effective adsorbent amount and contact time respectively are 5 g/L and 15 minutes with pH 8 and stirring speed of 150 rpm. Concentration of heavy metal adsorbed are 0,614 mg/L and 2,07 mg/L for lead (Pb) and zinc (Zn) with removal efficiency up to 61.0% for Pb and 9.8% for Zn.From this study clay waste could be potentially used as an adsorbent to reduce heavy metal amount in glaze wastewater.