TY - JOUR
T1 - A preliminary study of functional coating material of polypropylene itaconate incorporated with [Cu3(BTC)2] MOF as CO2 adsorbent
AU - Wibowo, Atmanto Heru
AU - Lestari, Witri Wahyu
AU - Teteki, Fitriana Jati
AU - Krisyuningsih, Yuni
AU - Suratman, Adhitasari
N1 - Publisher Copyright:
© 2016
PY - 2016/12/1
Y1 - 2016/12/1
N2 - The introduction of CO2 adsorbent of [Cu3(BTC)2] into coating material of polypropylene itaconate (PPIA) eventually opens up further investigation of the functional coating related to the air or gas adjustment. This paper presents the fabrication of functional coating materials based on PPIA modified with [Cu3(BTC)2]. Thermal stability, surface morphology, and the CO2-absorption ability of the obtained materials are investigated. The color of the coating film turned from the yellowish viscous liquid into blue opaque surface after incorporation of [Cu3(BTC)2]. For the best application of the coating material of PPIA, incorporation of [Cu3(BTC)2] into PPIA should not more than 20% (w/w), as the coating turned from a smooth surface to a coarser surface and a rigid form. The thermal stability of the PPIA coating decreased as the [Cu3(BTC)2] content in the PPIA increased. The content of 1–5% [Cu3(BTC)2] affected the significant CO2 adsorption on the coating, in which no significant CO2 response of the PPIA was seen with the absence of MOF on the coating materials. Above 10%, the CO2 adsorption of the coating was more than 50% of the adsorption value of [Cu3(BTC)2] MOF only. With the incorporation of 20%, the CO2 absorption reached about 84% of the absorption value of [Cu3(BTC)2] MOF. This study proved that the PPIA coating incorporating [Cu3(BTC)2] MOF could afford a coating material with a function to adsorb CO2 gas.
AB - The introduction of CO2 adsorbent of [Cu3(BTC)2] into coating material of polypropylene itaconate (PPIA) eventually opens up further investigation of the functional coating related to the air or gas adjustment. This paper presents the fabrication of functional coating materials based on PPIA modified with [Cu3(BTC)2]. Thermal stability, surface morphology, and the CO2-absorption ability of the obtained materials are investigated. The color of the coating film turned from the yellowish viscous liquid into blue opaque surface after incorporation of [Cu3(BTC)2]. For the best application of the coating material of PPIA, incorporation of [Cu3(BTC)2] into PPIA should not more than 20% (w/w), as the coating turned from a smooth surface to a coarser surface and a rigid form. The thermal stability of the PPIA coating decreased as the [Cu3(BTC)2] content in the PPIA increased. The content of 1–5% [Cu3(BTC)2] affected the significant CO2 adsorption on the coating, in which no significant CO2 response of the PPIA was seen with the absence of MOF on the coating materials. Above 10%, the CO2 adsorption of the coating was more than 50% of the adsorption value of [Cu3(BTC)2] MOF only. With the incorporation of 20%, the CO2 absorption reached about 84% of the absorption value of [Cu3(BTC)2] MOF. This study proved that the PPIA coating incorporating [Cu3(BTC)2] MOF could afford a coating material with a function to adsorb CO2 gas.
KW - CO adsorption
KW - Coating film
KW - PPIA
KW - [Cu(BTC)] MOF
UR - http://www.scopus.com/inward/record.url?scp=84989828824&partnerID=8YFLogxK
U2 - 10.1016/j.porgcoat.2016.09.025
DO - 10.1016/j.porgcoat.2016.09.025
M3 - Article
AN - SCOPUS:84989828824
SN - 0300-9440
VL - 101
SP - 537
EP - 542
JO - Progress in Organic Coatings
JF - Progress in Organic Coatings
ER -