A highly stable SiC based microhotplate NO2 gas-sensor

F. Solzbacher, Cuk Imawan, H. Steffes, E. Obermeier, M. Eickhoff

Research output: Contribution to journalArticlepeer-review

28 Citations (Scopus)

Abstract

A new heated microgas-sensor with only 80 μm × 80 μm active heater area and excellent long-term stability is presented. Using a previously presented SiC based microhotplate and depositing an In2O3 thin film layer on top of the interdigital electrode (IDE) structure an NO2 sensor for the MAK-range (German maximum workplace concentration limit: 5 ppm) was fabricated. The microhotplate allows a maximum operating temperature of up to 650°C, which is limited only by the IDE metallisation stability. When using In2O3 layers for NO2 detection, the hotplates' low operating power of 20 mW allows the continuous operation at operating temperature with an AAA battery cell for 75 h. More than 20,000 work cycles of 1 min could be realised before device failure leading to a life time of over half a year when sampling the ambient gas every 10 min.

Original languageEnglish
Pages (from-to)216-220
Number of pages5
JournalSensors and Actuators, B: Chemical
Volume78
Issue number1-3
DOIs
Publication statusPublished - 30 Aug 2001

Keywords

  • Gas-sensor
  • InO
  • Microhotplate
  • SiC

Fingerprint

Dive into the research topics of 'A highly stable SiC based microhotplate NO2 gas-sensor'. Together they form a unique fingerprint.

Cite this