Department of Metallurgical and Material Engineering

2024

Chemical Modification of Iron-Rich Beta Intermetallic Phase in Aluminium-Silicon Alloys: A Short Review

Ferdian, D., Fauziah, N. & Lacaze, J., 3 Jul 2024, In: E3S Web of Conferences. 543, 03012.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Effect of Plasticizer on Malleability of Polylactide-Based Craniomaxillofacial Fracture Fixation Plates

Koesoemowidodo, R. S. A., Pangesty, A. I., Whulanza, Y., Supriadi, S., Chalid, M., Sunarso & Abdullah, A. H., 7 Mar 2024, In: AIP Conference Proceedings. 3080, 1, 130002.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Effect of Post-Weld Treatment on the Microstructure and Mechanical Properties of Austempered FeNiCr Steel Welded Joint

Chandra, S. A., Zulkarnaen, D., Utama, D. P., Roberto, R., Hasbi, M. Y., Winarto & Citrawati, F., 3 Jul 2024, In: E3S Web of Conferences. 543, 03006.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Impact of random field-Size effect using Turning Band Method (TBM) on damage behavior modelling of oil palm shell concrete under compression test

Hani'A, A. I., Handika, N. & Astutiningsih, S., 22 Apr 2024, In: AIP Conference Proceedings. 3114, 1, 030013.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Improvement in Mechanical Properties of Mg-Li-Al Alloys as Orthopedic Implants Using Thermomechanical Process: A Review

Zakiyuddin, A., Ghazy, M. M., Jasmine, N. & Rahman, S. F., 7 Mar 2024, In: AIP Conference Proceedings. 3080, 1, 130001.

Research output: Contribution to journal › Conference article › peer-review

Molecular Docking Simulation of Copper Oxide and Zinc Oxide Nanoparticles Toward Target Enzyme SARS-CoV-2 Rdrp

Kurnianto, S. R., Simarmata, A. G. B., Fatriansyah, J. F., Anis, M., Rizqillah, R. K. & Yasin, M. A., 7 Mar 2024, In: AIP Conference Proceedings. 3080, 1, 060001.

Research output: Contribution to journal › Conference article › peer-review

Optimizing the photocatalytic performance of SnO₂ nanoparticles for methylene blue removal with variation in calcination temperatures

Nurhidayah, E., Yuwono, A. H., Septiningrum, F., Maulana, F. A., Dhaneswara, D., Sofyan, N., Pangesty, A. I. & Noviyanto, A., 6 Feb 2024, In: E3S Web of Conferences. 488, 02016.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2023

Effect of addition level of activated carbon from plastic waste recycling on LTO/carbon anode composites for lithium-ion batteries

Panjaitan, A. A. S., Siregar, R. J. O., Zulfia, A., Priyono, B. & Subhan, A., 6 Oct 2023, In: AIP Conference Proceedings. 2932, 1, 020002.

Research output: Contribution to journal › Conference article › peer-review

Fabrication of cellulose-based polymer electrolyte membrane with green solvent DMSO via N-TIPS technique

Ratri, C. R., Arundati, A. H., Pradana, F. D., Nugraha, A. F., Astutiningsih, S. & Chalid, M., 2023, In: IOP Conference Series: Earth and Environmental Science. 1239, 1, 012003.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Mold design and simulation of polymer miniplate and screw implant in the micro injection molding

Saragih, A. S., Pradipta, R. S., Supriadi, S., Chalid, M. & Whulanza, Y., 27 Oct 2023, In: AIP Conference Proceedings. 2837, 1, 040008.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

Optimisation of Heat Treatments on Shape Memory Effect of Cu-24Zn-3.65Al wt. % Alloy Produced by Gravity Casting

Setyani, A., Novakusuma, A. & Sofyan, B. T., 21 Jul 2023, In: AIP Conference Proceedings. 2689, 1, 070046.

Research output: Contribution to journal › Conference article › peer-review

Review of metal injection moulding technology and its development in Indonesia

Supriadi, S., Irawan, B., Suharno, B., Kiswanto, G., Prasetyadi, T. & Doloksaribu, M., 27 Oct 2023, In: AIP Conference Proceedings. 2837, 1, 060006.

Research output: Contribution to journal › Conference article › peer-review

Rheological Behavior on Various Mixing Times for Natural Rubber/Nano Carbon Black Composites

Winarto, D. A., Wulandari, R., Jamilah, N., Arti, D. K., Liza, C., Fathurrohman, M. I. & Chalid, M., 5 Oct 2023, In: AIP Conference Proceedings. 2902, 1, 070006.

Research output: Contribution to journal › Conference article › peer-review

The effect of sn addition on the performance of hydrothermal synthesized lithium titanium oxide

Dzulqornain, M., Simamora, E., Syahrial, A. Z., Subhan, A., Arrosyid, B. H., Noviyanto, A. & Priyono, B., 6 Oct 2023, In: AIP Conference Proceedings. 2932, 1, 020003.

Research output: Contribution to journal › Conference article › peer-review

2022

Heat Effectiveness Analysis of Knock Down Smoke LCS (Liquid Collection System) Design with a Mixture of Ethylene Glycol and Water as Cooling Media

Ramadhan, F. I., Soedarsono, J. W. M., Riastuti, R. & Maksum, A., 2022, In: IOP Conference Series: Earth and Environmental Science. 1111, 1, 012054.

Research output: Contribution to journal › Conference article › peer-review

Open Access

PV industry in China and three Southeast Asia countries: A systematic literature review using PRISMA

Rizqullah Hasian Rambey, M. F., Setiawan, E. A. & Madsuha, A. F., 4 Mar 2022, In: IOP Conference Series: Earth and Environmental Science. 997, 1, 012021.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

The Effect of Chimney Size on Knock-Down Pyrolysis Tank Design as Rice Husk Burner Using CFD Simulation

Rudiatama, M. R., Hamdi, H., Kamal, D. M., Soedarsono, J. W. M. & Maksum, A., 2022, In: IOP Conference Series: Earth and Environmental Science. 1111, 1, 012042.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

2021

Analysis of cyclic voltammetry in the recovery of copper from printed circuit board waste using diluted deep eutectic solvent

Sugondo, E., Harjanto, S. & Ulum, R. M., 10 Dec 2021, In: IOP Conference Series: Earth and Environmental Science. 882, 1, 012023.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Evaluation of coating performance on carbon steel A-36 in copper concentrate environment using electrochemical impedance spectroscopy

Fauzi, A. & Zakiyuddin, A., 10 Dec 2021, In: IOP Conference Series: Earth and Environmental Science. 882, 1, 012063.

Research output: Contribution to journal › Conference article › peer-review

Open Access

In silico molecular docking and molecular dynamics examination of Andrographis paniculata compounds of Andrographolide, Neoandrographolide, and 5-hydroxy-7,8,2',3'-tetramethoxyflavone inhibition activity to SARS-CoV-2 main protease

Rizqillah, R. K., Fatriansyah, J. F., Fadilah, Sulhadi, Wahyuni, S., Sudirman, M. A., Nafisah, H. C. & Lestari, S. D., 22 Dec 2021, In: BIO Web of Conferences. 41, 07002.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Study of selective reduction in lateritic nickel ore: Saprolite versus limonite

Nurjaman, F., Astuti, W., Bahfie, F. & Suharno, B., 2021, In: Materials Today: Proceedings. 44, p. 1488-1494 7 p.

Research output: Contribution to journal › Conference article › peer-review

18 Citations (Scopus)

Synthesis and characterization of bacterial cellulose by Acetobacter xylinum using liquid tapioca waste

Ghozali, M., Meliana, Y. & Chalid, M., 2021, In: Materials Today: Proceedings. 44, p. 2131-2134 4 p.

Research output: Contribution to journal › Conference article › peer-review

38 Citations (Scopus)

The effect of temperature and pressure on nitrogen adsorption in amorphous silica

Fatriansyah, J. F., Dhaneswara, D., Kuskendrianto, F. R., Abdurrahman, M. H., Yusuf, M. B. & Abdillah, F. A., 17 Nov 2021, In: Journal of Physics: Conference Series. 2070, 1, 012045.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

The effect of TiO2 addition on thermal resistance of geopolymer mortar based low alumina fly ash

Saukani, M., Febrianty, R., Ariska, N., Husein, S. & Astutiningsih, S., 27 Jan 2021, In: Journal of Physics: Conference Series. 1760, 1, 012053.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

2020

A direct comparison between poly(vinylidene) flouride and polysulfone flat sheet membrane; characterization and mechanical strength

Febriasari, A., Purnawan, I., Chalid, M., Ismojo, I. & Kartohardjono, S., 16 Mar 2020, In: IOP Conference Series: Earth and Environmental Science. 442, 1, 012002.

Research output: Contribution to journal › Conference article › peer-review

Open Access

6 Citations (Scopus)

Anti fouling coating characterization with purified Zirconia from West Kalimantan Zircon Sand for Boiler application

Lestari, Y., Zulfia, A., Krisnaputra, R., Satiti, N. N., Sulistiyono, E. & Mabruri, E., 3 Jul 2020, In: IOP Conference Series: Materials Science and Engineering. 858, 1, 012046.

Research output: Contribution to journal › Conference article › peer-review

Open Access

A Study of the properties and microstructure of high-magnesium nickel slag powder used as a cement supplement

Oksri-Nelfia, L., Akbar, R. & Astutiningsih, S., 18 May 2020, In: IOP Conference Series: Materials Science and Engineering. 829, 1, 012007.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Bond strength, hardness, and microstructure analysis of stellite coating applied on 410 steel surface using flame spray, plasma spray, and high-velocity oxyfuel spray process

Widya Satya, N., Mudiantoro, S. & Winarto, W., 13 Oct 2020, In: IOP Conference Series: Materials Science and Engineering. 924, 1, 012016.

Research output: Contribution to journal › Conference article › peer-review

Open Access

4 Citations (Scopus)

Characteristics of aluminium AC4B reinforced with nano -SiC composites through stir casting methods

Fitri, T. N., Narottama, W. & Zulfia, A., 21 Dec 2020, In: IOP Conference Series: Materials Science and Engineering. 909, 1, 012037.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Characteristics of composite magnesium with micro SiC particle for automotive applications with stir casting method

Susilo, N. R. & Syahrial, A. Z., 2020, In: IOP Conference Series: Materials Science and Engineering. 902, 1, 012028.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Characteristics of Magnesium/B₄C Reinforced Composite Fabricated by Stir Casting Method

Paulo Hang Jutanaiman, S. & Zulfia Syahrial, A., 13 Oct 2020, In: IOP Conference Series: Materials Science and Engineering. 924, 1, 012020.

Research output: Contribution to journal › Conference article › peer-review

Open Access

5 Citations (Scopus)

Characterization of 17-4 PH stainless steel metal injection molding feedstock using mixing torque data

Virdhian, S., Doloksaribu, M., Supriadi, S., Balfas, N. M., Suharno, B. & Shieddieque, A. D., 31 Dec 2020, In: IOP Conference Series: Materials Science and Engineering. 980, 1, 012053.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Citations (Scopus)

Characterization of aluminium AC4B/Nano TiC composite with the variation of volume fraction of nano TiC reinforced through stir casting process

Adam, M. K. & Syahrial, A. Z., 21 Dec 2020, In: IOP Conference Series: Materials Science and Engineering. 909, 1, 012038.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Dielectric Breakdown Strength and Energy Storage Density of CCTO-ZBS Electroceramic

Saari, M. Q., Mohamed, J. J., Sulaiman, M. A., Rahman, M. F. A., Ahmad, Z. A., Jamil, M. K. M., Rashid, M. W. A. & Yuwono, A. H., 28 Dec 2020, In: IOP Conference Series: Earth and Environmental Science. 596, 1, 012006.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Effect of 9wt% Mn addition on cold rolling and annealing behaviour of Cu-31Zn alloy

Hendrawan, C. N., Setyani, A., Pertiwi, D. R. K. & Sofyan, B. T., 2020, In: Materials Today: Proceedings. 46, p. 3346-3351 6 p.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

Effect of Carbon Active Addition to Electrochemical Performance of Li₄Ti₅O₁₂/SnO₂ Composite Anode on Lithiumion Battery

Simamora, E., Riady, J., Priyono, B. & Syahrial, A. Z., 27 May 2020, In: Journal of Physics: Conference Series. 1494, 1, 012045.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Effect of gas pressure on conduit plasma atomization for fabricating spherical stainless steel powder

Dharmanto, Supriadi, S., Sunar Baskoro, A. & Suharno, B., 21 Dec 2020, In: IOP Conference Series: Materials Science and Engineering. 909, 1, 012008.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Effect of sulfur and sodium sulfate on phase transformation and microstructure on carbothermic reduction of Indonesian ilmenite

Setiawan, A. & Harjanto, S., 30 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 833, 1, 012092.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Citations (Scopus)

Effects of Si addition on as-cast characteristics of Al-12Zn-6Mg-1Cu-xSi composites with 7.5vol% ZrO₂produced by squeeze casting

Fadhillah, R. N., Pertiwi, D. R. K., Setyani, A. & Sofyan, B. T., 2020, In: Materials Today: Proceedings. 46, p. 3240-3244 5 p.

Research output: Contribution to journal › Conference article › peer-review

Electrochemical Behavior of Nickel Laterite Ores Dissolution in Sulphuric Acid Solutions

Abidin, F., Gunawan Wibowo, A. H., Ambari, A. A. & Harjanto, S., 30 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 833, 1, 012058.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Electrochemical properties of ascorbic acid and folic acid under acidic solution

Abyor Handayani, N., Anisa Krisanti, E., Sadeli, Y., Kartohardjono, S. & Mulia, K., 30 Apr 2020, In: IOP Conference Series: Materials Science and Engineering. 778, 1, 012006.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Fracture toughness and microstructure of gas metal arc welded plates of aluminium alloy 5083 using different filler wires and heat inputs

Hidayat, A., Junaidi, A., Mudiantoro, S. & Winarto, W., 13 Oct 2020, In: IOP Conference Series: Materials Science and Engineering. 924, 1, 012017.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Influence the Filler Metal Containing Zirconium on the Weld Metal Porosity of the MIG Welded Aluminum Alloy 5083

Adam, W., Winarto, W. & Mudiantoro, S., 13 Oct 2020, In: IOP Conference Series: Materials Science and Engineering. 924, 1, 012018.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Lignin Effect to Synthesis of the Hybrid Polyurethane

Dwijaya, M. S., Setiaji, D. A., Mustafa, J. H. & Chalid, M., 16 Mar 2020, In: IOP Conference Series: Materials Science and Engineering. 740, 1, 012059.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Citations (Scopus)

Manufacturing of Mg-Al5TiB composite and addition of nano-sized Al₂O₃through stir casting method with T6 heat treatment temperature variation

Yusuf, S. & Syahrial, A. Z., 2020, In: IOP Conference Series: Materials Science and Engineering. 902, 1, 012025.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Microstructure and mechanical properties of magnesium Si₃N₄reinforced composite fabricated by stir casting method

Manggabarani, A. A. D. & Syahrial, A. Z., 2020, In: IOP Conference Series: Materials Science and Engineering. 902, 1, 012032.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

Preliminary 3D numerical pushover analysis of laterally loaded pile groups

Yuwono, A., Prakoso, W. A. & Lase, Y., 3 Nov 2020, In: IOP Conference Series: Materials Science and Engineering. 930, 1, 012033.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Citations (Scopus)

Study on the Effect of Volume Fraction (Vf%) SiC Addition to the Characteristics of Mg-Al-Sr/SiC Composites Using Stir Casting Method

Ramadhan, R. & Zulfia, A., 13 Oct 2020, In: IOP Conference Series: Materials Science and Engineering. 924, 1, 012022.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Citation (Scopus)

The Effect of Acid Type in Mechanochemical Treatment of Rice Husk Ash for Concrete Application

Fatriansyah, J. F., Khairunnisa, S. A., Dhaneswara, D., Rahmatullah, M. Z. & Ramadhan, B. A., 30 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 833, 1, 012066.

Research output: Contribution to journal › Conference article › peer-review

Open Access

The effect of pumice and clay composition in natural rubber-ethylene propylene diene monomer blends towards its curing characteristics and physic-mechanical properties

Rahmaniar, Susanto, T., Prasetya, H. A., Marlina, P., Purbaya, M., Chalid, M. & Hasan, A., 31 Dec 2020, In: IOP Conference Series: Materials Science and Engineering. 980, 1, 012003.

Research output: Contribution to journal › Conference article › peer-review

Open Access

5 Citations (Scopus)

Department of Metallurgical and Material Engineering

Research output

Search results