Department of Metallurgical and Material Engineering

2024

Analysis of external corrosion protection performance on buried gas pipeline using CIPS and DCVG methods

Dzakyprasetyo, R. Q., Ferdian, D., Aldila, D. (Editor), Zainal abidin, Z. (Editor), Imran, M. (Editor) & Widakdo, J. (Editor), 1 Jan 2024, The 9th International Symposium on Current Progress in Mathematics and Sciences 2023 (The 9th ISCPMS 2023) in conjunction with AUA Academic Conference on the Application of Artificial Intelligences and Data Sciences in a Modern Science for a Better Life. Vol. 61. 7 p. (ITM Web of Conferences).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Cleaning flux based on sodium sulfate and sodium chloride as an oxide inclusion cleaner in AC3A aluminum smelting recycling

Dhaneswara, D., Alaydrus, M. N., Fatriansyah, J. F. & Churiyanto, M., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070004. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Comparison study of chemical treatment of OPEFB fiber in the manufacture of microfibrillated cellulose

Mansur, I., Arrosid, A., Yuanita, E. & Chalid, M., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070006. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Development of local salt as drossing flux in smelting process of AlSi10Mg dross with ceramic crucible furnace

Dhaneswara, D., Niman, R. P., Churiyanto, M., Ashari, A. & Ferdiansyah, A., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070002. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Dissolution of ferronickel slag in the hydrothermal process using NaOH solution followed by water leaching: The effect of particle size

Mayangsari, W., Nurkhasanah, D. A., Ridhova, A., Prasetyo, A. B., Febriana, E., Sulistiyono, E., Subagja, R., Setiawan, I., Ulum, R. M., Wahyuningsih, S. & Soedarsono, J. W., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020110. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effect of austenitizing temperature on microstructure, amount of retained austenite, and hardness of AISI O1 tool steel

Hermawan, F. H. & Mochtar, M. A., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070001. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

1 Citation (Scopus)

Effect of desulfurization agent, temperature and roasting-reduction process time on high-pressure acid leaching (HPAL) nickel laterite residue

Andrameda, Y. A., Triaswinanti, R., Madra, Q. N., Novitasari, Y., Ikhwani, N., Kawigraha, A. & Harjanto, S., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020071. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Effect of high concentration of an ideal donor dopant on the dielectric properties of potassium sodium niobate (KNN) lead-free piezoelectric ceramic

Saari, M. Q., Mohamed, J. J., Yusoff, A. H., Ahmad, Z. A., Bahanurddin, N. F. K., Jumali, M. H., Jamil, N. H., Rahman, M. F. A. & Yuwono, A. H., 19 Jan 2024, AIP Conference Proceedings. Muhammad, W. N. A. B. W., Selimin, M. A. B., Abdullah, H. Z. B., Ibrahim, S. A. B., Kamdi, Z. B., Badarulzaman, N. A. B. & Hussin, R. B. (eds.). 1 ed. American Institute of Physics Inc., 020016. (AIP Conference Proceedings; vol. 2925, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Mechanical properties improvement of low 0.03 wt.% C steel through intercritical annealing

Romijarso, T. B., Rohmah, M., Fatkhurozak, Mabruri, E. & Siradj, E. S., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020069. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Observation of mechanical properties improvement of powder-based magnesium-carbonate apatite (Mg-10CA) through deformation strengthening process

Setyadi, I., Suryadi, Jujur, I. N., Harahap, M. E., Tiwibowo, B., Damisih, Suharno, B. & Supriadi, S., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020028. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Optimizing the performance of Li₄Ti₅O₁₂-ZnO nanorods by addition of activated carbon for lithium-ion battery anode

Priyono, B., Abraham, H., Abdillah, B. R., Utami, P. R., Triana, Y., Sulistijono, Hardjanto, S. & Subhan, A., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070009. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Pavement segregation detection using support vector machine

Fatriansyah, J. F., Kevin, C., Arunika, A. & Ramadheena, V. A., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070003. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Photocataylitic performance assessment of rGO-AgNPs nanocomposites using urea reductor for methyl orange dye degradation

Ciptasari, N. I., Handayani, M., Afkauni, A. A., Kaharudin, C. L., Hatmanto, A. D., Maksum, A., Riastuti, R. & Soedarsono, J. W., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020093. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Reducing impurities of silica sand by one step and two step leaching

Febriana, E., Mayangsari, W., Prasetyo, A. B., Irawan, J., Sulistiyono, E., Handayani, M., Firdiyono, F. & Soedarsono, J. W., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020112. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Starch effect as coupling agent to natural rubber based-hybrid synthesize through glow discharge electrolysis

Putri, A. P., Bais, A., Agita, A. & Chalid, M., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070007. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Study of mixing saprolite with limonite in selective reduction process

Nurjaman, F., Fajar, Y., Bahfie, F., Sari, Y., Khoerunnisa, D. I., Arham, L. O., Badaruddin, M., Suharno, B. & Sugiyanto, 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020082. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Synthesis of silica precipitates from ferronickel slag using water leaching with alkali fusion treatment

Prasetyo, A. B., Mayangsari, W., Febriana, E., Ridhova, A., Sulistyono, E., Firdiyono, F., Handayani, M. & Soedarsono, J. W., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020047. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

The characteristics and formation mechanism of Cu₂SnS₃-based solar cells synthesized using practical method

Nurliyanti, V., Pranoto, B., Gunawan, Y. & Munir, B., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020007. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

The effect of adding local salt as cover flux on the porosity and mechanical properties of the casting of aluminum alloys AC3A

Dhaneswara, D., Bunedi, D. O., Churiyanto, M., Ashari, A. & Ferdiansyah, A., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070005. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

The effect of dilution and lithium carbonate seed on decreasing of Mg/Li ratio from bittern salt pond waste

Sulistiyono, E., Harjanto, S. & Lalasari, L. H., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020051. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

The effect of sodium dodecyl benzene sulfonate addition on graphene oxide nanofluids quench medium for medium carbon S45C steel

Putra, W. N., Tugimin, E. & Mochtar, M. A., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070010. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

The effect of TiC addition and T6 heat treatment on ballistic properties of AA7075 reinforced composites through squeeze casting process

Zulfia, A. & Harits, D. H. S., 6 Feb 2024, AIP Conference Proceedings. Kusuma, A., Fatriansyah, J. F., Dhelika, R., Pratama, M. A., Irwansyah, R., Maknun, I. J., Putra, W. N., Ardi, R., Harwahyu, R., Harahap, Y. N. & Lischer, K. (eds.). 1 ed. American Institute of Physics Inc., 070008. (AIP Conference Proceedings; vol. 2710, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

1 Citation (Scopus)

The electrolysis technique without a salt bridge to reduce magnesium level and the Mg/Li ratio from brine water at various electrolysis duration

Lalasari, L. H., Riajeng Ratri Amalia Indra, B., Ulum, R. M., Andriyah, L., Arini, T., Natasha, N. C., Yunita, F. E., Sulistiyono, E., Suharyanto, A., Setiawan, I. & Firdiyono, F., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020059. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Topology Optimization for Custom Bed-Resting Ankle Foot Orthosis

Rashid, A. M. A., Nazid, E. Z. M., Mazlan, M. H., Pangesty, A. I. & Abdullah, A. H., 2024, Proceedings of the 2nd Human Engineering Symposium - HUMENS 2023. Hassan, M. H. A., Omar, M. N., Johari, N. H. & Zhong, Y. (eds.). Springer Science and Business Media Deutschland GmbH, p. 95-106 12 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Upgrading 1st tin slag's tantalum and niobium pentoxide by sodium hydroxide quenching and nitric acid leaching

Fadli, A., Permana, S., Agsya, R. T., Syuriadi, A., Abdillah, A. A., Susanto, I., Kartika, W. & Soedarsono, J. W. M., 28 Feb 2024, AIP Conference Proceedings. Yudanto, S. D., Akbar, A. Y., Rokhmanto, F., Dwijaya, M. S., Hasbi, M. Y., Mayangsari, W. & Thaha, Y. N. (eds.). 1 ed. American Institute of Physics, 020023. (AIP Conference Proceedings; vol. 3003, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2023

Activated carbon from rice husk with various activators for lithium-ion battery cathode material additive

Purwamargapratala, Y., Kartini, E., Zulfia, A., Sujatno, A., Putra, T. Y. S. P. & Jodi, H., 3 May 2023, International Conference on Battery for Renewable Energy and Electric Vehicles, ICB-REV 2021. Kartini, E. & Sofyan, N. (eds.). American Institute of Physics Inc., 020003. (AIP Conference Proceedings; vol. 2517).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

A review: Potential use of biomass as low-cost precursor for composite LiFePO₄/C cathode batteries preparation

Muhammad & Sofyan, N., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 070001. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

A review on photocatalytic performance of TiO₂nanotubes derived from hydrothermal process

Robby, A. F. R., Lalasari, L. H., Sofyan, N., Dhaneswara, D. & Yuwono, A. H., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 020001. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Characteristic of beef tallow/rice husk charcoal/plaster composite phase change materials

Astika, I. M., Winaya, I. N. S., Wirawan, I. K. G., Yuwono, A. H. & Subagia, I. D. G. A., 14 Mar 2023, 2nd International Conference on Design, Energy, Materials and Manufacture 2021, ICDEMM 2021. Asral, Ginting, Y. R., Negara, D. N. K. P., Akbar, M., Syafri, Anuar, K. & Badri, M. (eds.). American Institute of Physics Inc., 040005. (AIP Conference Proceedings; vol. 2568).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Comparative analysis of MgB2 superconducting wire for various cooling treatments through a sintering process

Yuwono, A. H., 23 Sept 2023, IOP Conference Series: Materials Science and Engineering.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Deep Learning for Life Cycle Assessment (LCA) Score Prediction on Plastic Bottle Packaging Products

Fatriansyah, J. F., Thaqia, A. D., Rohman, M. S., Hartoyo, F. & Dhaneswara, D., 15 Dec 2023, AIP Conference Proceedings. Shankar, H., Thangaraj, P. & Mohana Sundaram, K. (eds.). 1 ed. American Institute of Physics Inc., 060018. (AIP Conference Proceedings; vol. 2901, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Degradation kinetics studies of aluminum dross modified concrete in chloride solution

Budiarto, W., Riastuti, R., Darsono, N. & Thaha, Y. N., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 050001. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Design of graphical user interface (GUI) based on R for gas pipeline failure risk estimation due to uniform corrosion using the Monte Carlo method

Fatriansyah, J. F., Pradipta, M. C. L., Ahmad, L. D., Digita, F. R., Ovelia, H. & Mas'Ud, I. A., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 040004. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Design of python-based graphical user interface (GUI) as software for estimating risk of gas pipeline failure due to uniform corrosion using Monte Carlo method

Ahmad, L. D., Pradipta, M. C. L., Fatriansyah, J. F., Digita, F. R., Ovelia, H. & Mas'Ud, I. A., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 040005. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Development of Risk Estimation Program for Storage Tank Failure Due to Uniform Corrosion Based on Deep Neural Network

Federico, A., Fatriansyah, J. F., Irianti, G. P., Hartoyo, F. & Anis, M., 2023, 2023 International Conference on Information Technology Research and Innovation, ICITRI 2023. Institute of Electrical and Electronics Engineers Inc., p. 172-177 6 p. (2023 International Conference on Information Technology Research and Innovation, ICITRI 2023).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effect of aluminum dross on concrete reinforcement corrosion in chloride

Budiarto, W., Riastuti, R., Darsono, N. & Thaha, Y. N., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 050002. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effect of Fiber Composition and Mixing Time on Mechanical Properties of the Sorghum Fiber Reinforced Polypropylene Composite

Roziafanto, A. N., Naindraputra, A. J., Rosa, E. M. & Chalid, M., 24 May 2023, Proceedings of 2nd International Conference on Condensed Matters and Advanced Materials, IC2MAM 2020. Taufiq, A., Puspitasari, P., Sunaryono, Nur, H., Blake, G. R., Chuenchom, L., Diantoro, M., Khairurrijal, Triyana, K., Munasir, Pasang, T. & Mufti, N. (eds.). American Institute of Physics Inc., 020020. (AIP Conference Proceedings; vol. 2748).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effect of polyethylene glycol addition as surfactant on thermal conductivity of carbon nanotube based nanofluids

Hamidi, R. R. & Putra, W. N., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 030001. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Effect of quaternary basicity (CaO+MgO/Al₂O₃+SiO₂) in selective reduction of limonitic nickel ore

Nurjaman, F., Lamandasa, C. I., Bahfie, F., Sari, Y., Astuti, W., Ferdian, D. & Suharno, B., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 060009. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effect of surfactant addition on TiO₂nanofluid as quench medium in heat treatment process of S45C medium carbon steel

Putra, W. N., Muhammad, F., Ramadhani, C., Fahmy, I. & Harjanto, S., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 080002. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Effect of ultrasonic pretreatment on electrochemical performance of LiFe_0.5Mn_0.5PO₄/V/C composite in lithium-ion battery cathode

Wijayati, A., Sofyan, N., Yuwono, A. H., Dhaneswara, D., Syahrial, A. Z., Priyono, B. & Subhan, A., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 070002. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effects of sintering time and cooling process on FeSe superconductors synthesized by powder in sealed tube technique

Herbirowo, S., Yuwono, A. H., Sofyan, N., Aryanto, D., Pramono, A. W. & Imaduddin, A., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 020002. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

EIS analysis of corrosion behavior of aluminum dross concrete in chloride environment

Budiarto, W., Riastuti, R., Darsono, N. & Thaha, Y. N., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 050003. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Evaluating the effect of ZnO structure on electrical properties using capacitive sensor

Sholehah, A., Ganiharto, R., Huda, N., Al Huda, M., Sofyan, N., Yuwono, A. H. & Yuliarto, B., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 020003. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Investigating the effect of crystallite size on the optical properties of zinc oxide

Rahman, A., Lalasari, L. H., Sofyan, N., Daneswara, D. & Yuwono, A. H., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 020005. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Laterite Nickel Hydrometallurgical Residues Characterization and Potential Utilization of Valuable Elements

Ikhwani, N., Harjanto, S., Kawigraha, A., Andrameda, Y. A. & Permatasari, N. V., 29 Dec 2023, AIP Conference Proceedings. Dharma, I. A., Puspasari, I., Murnani, S., Sugarindra, M. & Rahma, F. N. (eds.). 1 ed. American Institute of Physics Inc., 080002. (AIP Conference Proceedings; vol. 2828, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

Life Cycle Assessment (LCA) Score Prediction of Laminated Foil Packaging by the implementation of Deep Learning

Fatriansyah, J. F., Pradana, A. F., Siregar, J. B. T., Nurjaya, D. M., Anis, M. & Priadi, D., 15 Dec 2023, AIP Conference Proceedings. Shankar, H., Thangaraj, P. & Mohana Sundaram, K. (eds.). 1 ed. American Institute of Physics Inc., 060020. (AIP Conference Proceedings; vol. 2901, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Life Cycle Assessment (LCA) Score Prediction Using Deep Learning on Detergent Plastic Packing Products

Fatriansyah, J. F., Putri, A. R., Hartoyo, F., Pradana, A. F. & Fauzi, A., 15 Dec 2023, AIP Conference Proceedings. Shankar, H., Thangaraj, P. & Mohana Sundaram, K. (eds.). 1 ed. American Institute of Physics Inc., 060019. (AIP Conference Proceedings; vol. 2901, no. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Microstructural characterization of IN625 - NiCrAlY bond coat system fabricated by additive manufacturing

Damanik, F., Ferdian, D., Priadi, D. & Dhaneswara, D., 9 May 2023, Advances in Metallurgy and Engineering Materials: Characterizations and Innovation. Fatriansyah, J. F., Ferdian, D., Putra, W. N., Yuwono, A. H., Dhaneswara, D. & Sofyan, N. (eds.). American Institute of Physics Inc., 080006. (AIP Conference Proceedings; vol. 2538).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Mixing Temperature and Fiber Composition Effect to Mechanical Properties in Polypropylene Composite with Sorghum Fiber Reinforcement

Ismojo, I., Marthin, G., Laurentius, L. & Chalid, M., 24 May 2023, Proceedings of 2nd International Conference on Condensed Matters and Advanced Materials, IC2MAM 2020. Taufiq, A., Puspitasari, P., Sunaryono, Nur, H., Blake, G. R., Chuenchom, L., Diantoro, M., Khairurrijal, Triyana, K., Munasir, Pasang, T. & Mufti, N. (eds.). American Institute of Physics Inc., 020012. (AIP Conference Proceedings; vol. 2748).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Department of Metallurgical and Material Engineering

Research output

Search results